Nissan Pathfinder (2008 year). Manual — part 118
BRM-12
< SERVICE INFORMATION >
BODY REPAIR
4.
Apply bitumen wax after applying undercoating.
Body Sealing
INFOID:0000000001697783
DESCRIPTION
LIIA0129E
BODY REPAIR
BRM-13
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
The following figure shows the areas which are sealed at the factory. Sealant which has been applied to these
areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of
sealant and not to allow other unaffected parts to come into contact with the sealant.
LIIA1736E
BRM-14
< SERVICE INFORMATION >
BODY REPAIR
WIIA0728E
BODY REPAIR
BRM-15
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
LIIA1738E
BRM-16
< SERVICE INFORMATION >
BODY REPAIR
Body Construction
INFOID:0000000001697784
BODY CONSTRUCTION
Body Alignment
INFOID:0000000001697785
BODY CENTER MARKS
LIIA1739E
BODY REPAIR
BRM-17
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
A mark has been placed on each part of the body to indicate the vehicle center. When repairing parts dam-
aged by an accident which might affect the vehicle frame (members, pillars, etc.), more accurate and effective
repair will be possible by using these marks together with body alignment specifications.
PANEL PARTS MATCHING MARKS
LIIA1790E
BRM-18
< SERVICE INFORMATION >
BODY REPAIR
A mark has been placed on each body panel to indicate the parts matching positions. When repairing parts
damaged by an accident which might affect the vehicle structure (members, pillars, etc.), more accurate and
effective repair will be possible by using these marks together with body alignment specifications.
DESCRIPTION
• All dimensions indicated in the figures are actual.
• When using a tracking gauge, adjust both pointers to equal length. Then check the pointers and gauge itself
to make sure there is no free play.
• When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
• Measurements should be taken at the center of the mounting holes.
• An asterisk (*) following the value at the measuring point indicates that the measuring point on the other side
is symmetrically the same value.
• The coordinates of the measurement points are the distances measured from the standard line of "X", "Y"
and "Z".
LIIA1791E
BODY REPAIR
BRM-19
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Engine Compartment
LIIA1506E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст