Nissan Versa Note. Manual — part 788
TM-32
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
TRANSAXLE ASSEMBLY
10. Remove transaxle case bolts (
).
11. Remove transaxle case from clutch housing.
12. Remove spacer (1) and 4th main gear (2) from mainshaft.
13. Remove 5th-reverse fork rod (1).
a. Pull 5th-reverse fork rod up until it contacts claw ( ) of reverse
gear (2).
b. Press gear portion of reverse gear down, and then remove 5th-
reverse fork rod from clutch housing.
14. Remove 3rd-4th fork rod assembly (1), 3rd-4th coupling sleeve
(2), and input shaft assembly (3).
a. Remove 4th baulk ring, insert keys, and springs from mainshaft.
b. Pull gear of reverse gear (4) up.
c.
Pull 1st-2nd fork rod (5) up, and then maintain the neutral posi-
tion.
d. Remove 3rd-4th fork rod assembly, 3rd-4th coupling sleeve, and
input shaft assembly from clutch housing at the same time.
15. Remove retaining pin from 3rd-4th shift fork, using a pin punch.
16. Remove 3rd-4th shift fork from 3rd-4th shift fork rod.
17. Remove lock pins (
) from clutch housing.
JPDIC0610ZZ
PCIB1529E
PCIB1530E
PCIB1531E
JPDIC0534ZZ
TRANSAXLE ASSEMBLY
TM-33
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
18. Remove 1st-2nd fork rod assembly (1) and mainshaft assembly
(2) from clutch housing at the same time.
19. Remove retaining pin from 1st-2nd shift fork, using suitable tool.
20. Remove 1st-2nd shift fork from 1st-2nd shift fork rod.
21. Remove retaining pin from reverse gear, using suitable tool.
22. Remove reverse gear from clutch housing.
23. Remove final drive (1) from clutch housing.
24. Remove magnet and dowel pins (2) from clutch housing.
25. Remove plug (1) from clutch housing (2).
• (C): Plug
• (D): 15 mm (0.59 in)
• (E): 45 mm (1.77 in)
• (F): 95 mm (3.74 in) or more
• (G): 4 mm (0.16 in)
a. Install suitable tool (A) and (B) to the holes of clutch housing as
shown.
b. While pressing the suitable tool (A) and (B) in the direction of the
arrows shown, remove plug from clutch housing.
PCIB1532E
MCIB0033E
PCIB1533E
AWDIA0946ZZ
TM-34
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
TRANSAXLE ASSEMBLY
26. Remove input shaft front bearing from clutch housing, using suit-
able tool.
27. Cut oil channel tube at the base.
CAUTION:
Do not reuse oil channel.
NOTE:
Oil channel will be removed with the mainshaft front bearing.
28. Remove mainshaft front bearing and oil channel from clutch
housing, using Tool (A).
29. Remove bushings (1) from clutch housing, using suitable tool.
30. Remove differential side oil seals (1) from clutch housing and
transaxle case, using suitable tool.
CAUTION:
Do not damage transaxle case and clutch housing.
MCIB0044E
Tool number
: KV111011S0 ( — )
PCIB1536E
PCIB1537E
PCIB1534E
TRANSAXLE ASSEMBLY
TM-35
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
31. Remove differential side bearing outer races (1) from clutch
housing and transaxle case, using suitable tool.
CAUTION:
Do not damage transaxle case and clutch housing.
32. Pull 2-way connector (1) straight out to remove it from air
breather inner tube (2).
33. Remove air breather inner tube from transaxle case.
34. Remove bushings (1) from transaxle case, using suitable tool.
35. Remove retaining pin (
) from selector, using suitable tool.
36. Remove selector from control shaft.
37. Remove oil gutter from transaxle case.
38. Remove bolt (
), and then remove bushing, spring, and gear
catch from transaxle case.
39. Remove check ball plug from transaxle case.
40. Remove bolts (
), and then remove control shaft (1) from tran-
saxle case.
41. Remove O-ring from control shaft.
JPDIC0484ZZ
PCIB1541E
PCIB1538E
JPDIC0533ZZ
PCIB1540E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст