Nissan Versa Note. Manual — part 431
EXL-108
< REMOVAL AND INSTALLATION >
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000008969415
Removal and Installation
INFOID:0000000008969416
REMOVAL
1. Remove back door outer finisher. Refer to
EXT-46, "Removal and Installation"
2. Disconnect harness connector from license plate lamp.
3. Release license plate lamp pawl and remove license plate lamp.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000008969417
WARNING:
Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION:
• Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REMOVAL
1. Remove license plate lamp. Refer to
EXL-108, "Removal and Installation"
.
2. Rotate license plate lamp bulb socket counterclockwise and remove.
3. Remove license plate lamp bulb from bulb socket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install the bulb socket securely for watertightness.
1.
License plate lamp bulb socket
2.
License plate lamp bulb
3.
Seal
4.
License plate lamp
Pawl
AWLIA2173ZZ
FRONT COMBINATION LAMP
EXL-109
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000009670467
Disassembly and Assembly
INFOID:0000000009670468
WARNING:
Do not touch bulb while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
DISASSEMBLY
1. Remove front combination lamp. Refer to
EXL-99, "Removal and Installation"
.
2. Rotate lock ring counterclockwise and remove.
3. Remove headlamp bulb.
4. Rotate side marker bulb socket counterclockwise and remove.
5. Remove the side marker lamp bulb from the side marker bulb socket.
6. Rotate turn signal/parking lamp bulb socket counterclockwise and remove.
7. Remove turn signal/parking lamp bulb from turn signal/parking lamp bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
• After installing the headlamp bulb, be sure to install lock ring securely to ensure watertightness.
• After installing, be sure to install the bulb sockets securely to ensure watertightness.
1.
Front combination lamp
2.
Side marker lamp bulb
3.
Side marker lamp socket
4.
Headlamp bulb
5.
Lock ring
6.
Front turn signal/Parking lamp
bulb socket
7.
Front turn signal/Parking lamp
bulb
AWLIA2165ZZ
EXL-110
< UNIT DISASSEMBLY AND ASSEMBLY >
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Exploded View
INFOID:0000000009670471
Disassembly and Assembly
INFOID:0000000009670472
WARNING:
Do not touch bulb while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
DISASSEMBLY
1. Remove rear combination lamp. Refer to
EXL-105, "Removal and Installation"
2. Rotate rear turn signal lamp bulb socket counterclockwise and remove.
3. Remove rear turn signal lamp bulb from bulb socket.
4. Rotate back-up lamp bulb socket counterclockwise and remove.
5. Remove back-up lamp bulb from bulb socket.
6. Rotate stop/tail lamp bulb socket counterclockwise and remove.
7. Remove stop/tail lamp bulb from bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
After installing, be sure to install the bulb sockets securely to ensure watertightness.
1.
Rear combination lamp
2.
Stop/tail lamp bulb
3.
Back-up lamp bulb
4.
Rear turn signal lamp bulb
5.
Harness connector
AWLIA2166ZZ
SERVICE DATA AND SPECIFICATIONS (SDS)
EXL-111
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb specification
INFOID:0000000008969418
*: Always check with the Parts Department for the latest parts info.
Item
Wattage (W)*
Front combination
Headlamp (HI/LO)
65/55
Front Turn signal/Parking lamp
27/8
Side marker lamp
5
Fog lamp (if equipped)
55
Rear combination
Stop/Tail lamp
21/5
Rear turn signal lamp
21
Back-up lamp
21
License plate lamp
5
High-mounted stop lamp
Normal glass
LED
Privacy glass
LED
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст