Nissan Versa Note. Manual — part 675
SE-30
< REMOVAL AND INSTALLATION >
REAR SEAT
SEAT CUSHION
SEAT CUSHION : Removal and Installation
INFOID:0000000009567491
REMOVAL
1. Lift up the seat cushion assembly front edge (B) to release it from the seat cushion hooks (A) (LH/RH) and
remove.
: Front
INSTALLATION
Installation is in the reverse order of removal.
SEATBACK
SEATBACK : Removal and Installation
INFOID:0000000009567492
REMOVAL
Seatback (LH)
1. Release seat belt retractor (center) (1) from seat belt buckle
(LH) (2) using a suitable tool (A) as shown (
).
2. Place the seatback (LH) in the folded down position.
3. Release hook fasteners (A).
4. Remove bolts (B) and the seatback (LH) (1).
19. Seatback pad (LH)
20. Seatback trim (LH)
21. Seatback latch finisher (LH)
22. Seatback frame (LH)
23. Seatback latch bracket (LH)
24. Seatback latch (LH)
25. Seatbelt guide finisher
26. Seat belt guide
27. Seatback (LH)
Pawl
JMJIA4835ZZ
ALHIA0315ZZ
ALJIA1242ZZ
REAR SEAT
SE-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Seatback (RH)
1. Place the seatback (RH) in the folded down position.
2. Release hook fasteners (A).
3. Remove bolts (B) and the seatback (RH) (1).
INSTALLATION
Installation is in the reverse order of removal.
Tighten the seatback assembly bolts to specification. Refer to
SEATBACK HINGE
SEATBACK HINGE : Removal and Installation
INFOID:0000000009567493
REMOVAL
1. Remove the seatbacks (LH/RH). Refer to
SE-30, "SEATBACK : Removal and Installation"
.
2. Remove the seat cushion. Refer to
SE-30, "SEAT CUSHION : Removal and Installation"
3. Remove bolts (A) and the seatback hinge (1).
INSTALLATION
Installation is in the reverse order of removal.
Tighten the seatback hinge assembly bolts to specification. Refer to
.
SEATBACK STRIKER
SEATBACK STRIKER : Removal and Installation
INFOID:0000000009639110
REMOVAL
1. Remove the luggage side upper finisher. Refer to
INT-35, "LUGGAGE SIDE UPPER FINISHER :
.
2. Remove bolts and the seatback strikers.
INSTALLATION
Installation is in the reverse order of removal.
Tighten the seatback striker bolts to specification. Refer to
.
SEAT CUSHION HOOK
SEAT CUSHION HOOK : Removal and Installation
INFOID:0000000009567485
REMOVAL
ALJIA1243ZZ
ALJIA1244ZZ
SE-32
< REMOVAL AND INSTALLATION >
REAR SEAT
1. Remove the seat cushion. Refer to
SE-30, "SEAT CUSHION : Removal and Installation"
.
2. Release the seat cushion hook pawls as shown and remove.
CAUTION:
Before removing the seat cushion hook, check its orientation (front/rear).
INSTALLATION
Installation is in the reverse order of removal.
JMJIA6035ZZ
FRONT HEATED SEAT SWITCH
SE-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
FRONT HEATED SEAT SWITCH
Removal and Installation
INFOID:0000000009567684
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation"
2. Release pawls using a suitable tool and remove the front heated
seat switches (1).
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1245ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст