Nissan Versa Note. Manual — part 676
SE-34
< UNIT DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
UNIT DISASSEMBLY AND ASSEMBLY
FRONT SEAT
DRIVER SIDE
DRIVER SIDE : Exploded View
INFOID:0000000009567631
DRIVER SEAT WITH LIFT
ALJIA1238ZZ
1.
Armrest
2.
Seatback trim
3.
Seatback pad
4.
Seat cushion trim
5.
Seat cushion pad
6.
Seat cushion frame
7.
Seat belt buckle
8.
Seat cushion outer finisher (RH)
9.
Seat cushion outer finisher (LH)
10. Lift lever
11. Lift lever finisher
12. Recline lever
13. Slide finisher rear (LH/RH)
14. Side air bag module
15. Chute rod
16. Headrest holder (locked)
17. Headrest holder (free)
18. Headrest
19. Seat frame
FRONT SEAT
SE-35
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
DRIVER SEAT WITHOUT LIFT
DRIVER SIDE : Seatback
INFOID:0000000009567495
WARNING:
• Always work from the side or back of the seatback, do not work in front of seat.
• Do not damage the, chute, connectors, retainers, clips, module harness or the side air bag module.
DISASSEMBLY
1. Remove the driver side front seat. Refer to
SE-20, "DRIVER SIDE : Removal and Installation"
2. Remove the headrest.
ALJIA1237ZZ
1.
Seatback trim
2.
Seatback pad
3.
Seat cushion trim
4.
Seat cushion pad
5.
Seat cushion frame
6.
Seat belt buckle
7.
Seat cushion outer finisher (RH) 8.
Seat frame
9.
Seat cushion outer finisher (LH)
10. Recline lever
11. Slide finisher rear (LH/RH)
12. Side air bag module
13. Chute rod
14. Headrest holder (locked)
15. Headrest holder (free)
16. Headrest
SE-36
< UNIT DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
3. Release trim strap (A) from the seat cushion frame.
4. Remove the armrest (1) (if equipped).
a. Unzip the armrest to access armrest bolt (A).
b. Remove armrest bolt (A) and armrest (1).
5. Release the J-hook retainer (C), unzip seatback zippers (A) and
release J-clips (B).
6. Release the headrest holder locks as shown and remove.
CAUTION:
Before removing the headrest holder, check its orientation
(front/rear and right/left).
7. Remove and discard the chute rod nuts (B), then route the chute
rod (1) through the opening and remove it from the chute (A).
CAUTION:
Do not reuse the chute rod nuts.
JMJIA6015ZZ
ALJIA0994ZZ
AWJIA1114ZZ
JMJIA4073ZZ
ALJIA0992ZZ
FRONT SEAT
SE-37
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
8. Unclip the side air bag module harness from the seat frame.
NOTE:
Take note of harness routing and attachment location for correct installation.
9. Remove and discard the side air bag module nuts (A).
CAUTION:
Do not reuse the side air bag module nuts.
10. Release the side air bag module studs from the seat frame and lift the seatback trim and seatback pad
from the seat frame.
11. Remove the side air bag module. Refer to
SE-24, "DRIVER SIDE : Side Air Bag Module"
12. Remove the hog rings and separate the seatback trim (1) from
the seatback pad.
: Hog ring
NOTE:
Remove all pieces of hog rings and discard them.
ASSEMBLY
Assembly is in the reverse order of disassembly.
• Tighten the side air bag module nuts to specification. Refer to
SE-34, "DRIVER SIDE : Exploded View"
• Tighten the chute rod nuts to specification. Refer to
SE-34, "DRIVER SIDE : Exploded View"
.
• Install new hog rings on the seatback trim in original positions.
• Use only one hog ring in each designated location.
• Make sure hog rings are correctly fastened around both the seat-
back trim and seatback pad wires.
• Use NISSAN standard hog rings and tools to assemble.
CAUTION:
• Do not reuse the side air bag module nuts.
• Do not reuse the chute rod nuts.
• Inspect seatback pad, seatback trim and seatback trim chutes. Replace if damaged.
• Smooth out all wrinkles during assembly.
• Always route side air bag module harness in original location. Replace any deformed or damaged
clips with same type and color. Always install clips in the original location in the harness.
• When installing the side air bag module, make sure there are no wrinkles and the chute is not folded,
twisted or pinched.
• After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer
ALJIA0991ZZ
ALJIA0988ZZ
PIIB3356J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст