Nissan Versa Note. Manual — part 866

TPMS SYMPTOMS

WT-33

< SYMPTOM DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

SYMPTOM DIAGNOSIS

TPMS SYMPTOMS

Symptom Table

INFOID:0000000009443187

Symptom

Reference

Low tire pressure warning lamp does not turn ON.

WT-34

Low tire pressure warning lamp does not turn OFF.

WT-35

Low tire pressure warning lamp blinks.

WT-36

ID registration cannot be completed.

WT-39

Easy fill alert does not activate.

WT-37

WT-34

< SYMPTOM DIAGNOSIS >

LOW TIRE PRESSURE WARNING LAMP DOES NOT TURN ON

LOW TIRE PRESSURE WARNING LAMP DOES NOT TURN ON

Diagnosis Procedure

INFOID:0000000009443188

1.

PERFORM SELF DIAGNOSTIC RESULT

Perform “SELF DIAGNOSTIC RESULT”.
Is DTC “U1000” detected?

YES

>> Malfunction in CAN communication system. Refer to

LAN-55, "Diagnosis Procedure"

.

NO

>> GO TO 2

2.

CHECK COMBINATION METER

Check combination meter operation. Refer to

MWI-15, "CONSULT Function"

.

Is the inspection result normal?

YES

>> Replace BCM. Refer to

BCS-70, "Removal and Installation"

.

NO

>> Replace combination meter. Refer to

MWI-54, "Removal and Installation"

.

LOW TIRE PRESSURE WARNING LAMP DOES NOT TURN OFF

WT-35

< SYMPTOM DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

LOW TIRE PRESSURE WARNING LAMP DOES NOT TURN OFF

Diagnosis Procedure

INFOID:0000000009443189

1.

INSPECT BCM CONNECTOR

1. Turn ignition switch OFF.

2. Disconnect BCM connectors.

3. Check terminals for damage or loose connections.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace damaged parts.

2.

BCM POWER SUPPLY AND GROUND CIRCUITS

Check BCM power supply and ground circuits. Refer to

BCS-64, "Diagnosis Procedure"

(with I-key) or

BCS-

120, "Diagnosis Procedure"

(without I-key).

Is the inspection result normal?

YES

>> Replace BCM. Refer to

BCS-70, "Removal and Installation"

(with I-Key) or

BCS-127, "Removal

and Installation"

(without I-Key).

NO

>> Repair BCM circuits.

WT-36

< SYMPTOM DIAGNOSIS >

LOW TIRE PRESSURE WARNING LAMP BLINKS

LOW TIRE PRESSURE WARNING LAMP BLINKS

Diagnosis Procedure

INFOID:0000000009443190

NOTE:

If low tire pressure warning lamp repeats blinking ON for 2 seconds and OFF for 0.2 seconds, ID registration

for all transmitters is not complete.

Carry out ID registration. Refer to

WT-22, "Work Procedure"

.

1.

CHECK BCM CONNECTOR

1. Turn ignition switch OFF.

2. Disconnect BCM connectors.

3. Check terminals for damage or loose connections.
Is the inspection result normal?

YES

>> Replace BCM. Refer to

BCS-70, "Removal and Installation"

(with I-Key) or

BCS-127, "Removal

and Installation"

(I-Key).

NO

>> Repair or replace damaged parts.