Nissan Frontier D22. Manual — part 797
MA-42
CHASSIS AND BODY MAINTENANCE
Checking Disc Brake
ELS000Y9
ROTOR
Check condition, wear and damage.
CALIPER
Check for leakage.
PAD
Check wear or damage.
Checking Drum Brake
ELS000YA
WHEEL CYLINDER
Check for leakage.
DRUM
Check condition and inner surface.
Standard thickness
KA24DE
: 26 mm (1.024 in)
VG33E & VG33ER
: 28 mm (1.10 in)
Minimum thickness
KA24DE
: 24 mm (0.945 in)
VG33E & VG33ER
: 26 mm (1.024 in)
SMA260A
SMA922A
Standard thickness
: 10 mm (0.39 in)
Minimum thickness
: 2.0 mm (0.079 in)
LMA051
Standard inner diameter
KA24DE
: 260.0 mm (10.23 in)
VG33E & VG33ER
: 295.0 mm (11.61 in)
Drum repair limit (inner diameter)
KA24DE
: 261.5 mm (10.30 in)
VG33E & VG33ER
: 296.5 mm (11.67 in)
SMA848B
CHASSIS AND BODY MAINTENANCE
MA-43
C
D
E
F
G
H
I
J
K
M
A
B
MA
LINING
Check wear or damage.
Checking Steering Gear and Linkage
ELS000YB
STEERING GEAR
●
Check steering gear housing for looseness, damage and oil
leakage.
●
Check connection with steering column for looseness.
STEERING LINKAGE
●
Check ball joint, dust cover and other component parts for looseness, wear, damage and grease leakage.
Checking Power Steering Fluid and Lines
ELS000YC
CHECKING FLUID LEVEL
●
Check fluid level with engine off.
●
Check fluid level on reservoir. Use “HOT” range at fluid tempera-
tures of 50
° to 80°C (122° to 176°F). Use “COLD” range at fluid
temperatures of 0
° to 30°C (32° to 86°F).
CAUTION:
●
Do not overfill.
●
Recommended fluid is Genuine NISSAN PSF, Canada NIS-
SAN Automatic Transmission Fluid, DEXRON™ III, MER-
CON™ or equivalent ATF may also be used.
Refer to
MA-12, "RECOMMENDED FLUIDS AND LUBRI-
.
CHECKING LINES
●
Check lines for improper attachment, leaks, cracks, damage,
loose connections, chafing and deterioration.
Standard thickness
KA24DE
: 5.5 mm (0.217 in)
VG33E & VG33ER
: 6.1 mm (0.240 in)
Minimum thickness
Lining wear limit
: 1.5 mm (0.059 in)
SMA849B
AMA144
AMA155
AST255
MA-44
CHASSIS AND BODY MAINTENANCE
Checking Axle and Suspension Parts
ELS000YD
FRONT AND REAR AXLE AND SUSPENSION PARTS
Check front and rear axle and suspension parts for excessive play, cracks, wear or other damage.
●
Shake each wheel to check for excessive play.
●
Rotate each wheel to check for abnormal noise.
●
Check axle and suspension nuts and bolts for looseness.
●
Check strut (shock absorber) for oil leakage or other damage.
●
Check suspension ball joint for grease leakage and ball joint
dust cover for cracks or other damage.
DRIVE SHAFT
Check boot and drive shaft for cracks, wear, damage, and grease
leakage.
SMA525A
ASU018
SFA901
CHASSIS AND BODY MAINTENANCE
MA-45
C
D
E
F
G
H
I
J
K
M
A
B
MA
Lubricating Locks, Hinges and Hood Latches
ELS000YE
Lubricate the locations shown. Refer to
MA-12, "RECOMMENDED FLUIDS AND LUBRICANTS"
.
WLIA0002E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст