Nissan Rogue. Manual — part 1202
TM-180
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
O/D OFF INDICATOR LAMP
O/D OFF INDICATOR LAMP
Component Function Check
INFOID:0000000011279399
1.
CHECK O/D OFF INDICATOR LAMP FUNCTION
Check O/D OFF indicator lamp turns ON for approx. 2 seconds when ignition switch turns ON.
Is the inspection results normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000011279400
1.
CHECK DTC (TCM)
With CONSULT
1. Turn ignition switch ON.
2. Check “Self Diagnostic Results” in “TRANSMISSION”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
.
NO
>> GO TO 2.
2.
CHECK DTC (COMBINATION METER)
With CONSULT
Check “Self Diagnostic Results” in “METER/M&A”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
NO
>> GO TO 3.
3.
CHECK COMBINATION METER INPUT/OUTPUT SIGNAL
With CONSULT
1. Shift the selector lever to “D” position.
2. Select “Data Monitor” in “METER/M&A”.
3. Select “O/D OFF IND”.
4. Check that “O/D OFF IND” turns ON/OFF when overdrive control switch is operated. Refer to
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> GO TO 4.
4.
CHECK TCM INPUT/OUTPUT SIGNAL
With CONSULT
1. Select “Data Monitor” in “TRANSMISSION”.
2. Select “SPORT MODE SW”.
3. Check that “SPORT MODE SW” turns ON/OFF when overdrive control switch is operated. Refer to
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Check overdrive control switch circuit. Refer to
.
SHIFT POSITION INDICATOR CIRCUIT
TM-181
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SHIFT POSITION INDICATOR CIRCUIT
Component Parts Function Inspection
INFOID:0000000011279401
1.
CHECK SHIFT POSITION INDICATOR
1. Start the engine.
2. Shift selector lever.
3. Check that the selector lever position and the shift position indicator on the combination meter are identi-
cal.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000011279402
1.
CHECK TCM INPUT/OUTPUT SIGNAL
With CONSULT
1. Start the engine.
2. Select “Data Monitor” in “TRANSMISSION”.
3. Select “RANGE”.
4. Shift selector lever.
5. Check that selector lever position, “RANGE” on CONSULT screen, and shift position indicator display on
combination meter are identical.
Is the check result normal?
YES
>> INSPECTION END
NO-1 (“RANGE” is changed but is not displayed on shift position indicator.>>Check “Self Diagnostic Result”
in “TRANSMISSION”.
NO-2 (“RANGE” and shift position indicator are different.)>>Check “Self Diagnostic Result” in “TRANSMIS-
SION”.
NO-3 (Specific “RANGE” is not displayed on shift position indicator.)>>Check “Self Diagnostic Result” in
“METER/M&A”.
TM-182
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
SHIFT LOCK SYSTEM
SHIFT LOCK SYSTEM
Component Function Check
INFOID:0000000011279403
1.
CHECK SHIFT LOCK OPERATION (PART 1)
1. Turn ignition ON.
2. Shift the selector lever to “P” position.
3. Attempt to shift the selector lever to any other than position with the brake pedal released.
Can the selector lever be shifted to any other position?
YES
>> Go to
NO
>> GO TO 2.
2.
CHECK SHIFT LOCK OPERATION (PART 2)
Attempt to shift the selector lever to any other than position with the brake pedal depressed.
Can the selector lever be shifted to any other position?
YES
>> Inspection End.
NO
>> Go to
Diagnosis Procedure
INFOID:0000000011279404
Regarding Wiring Diagram information, refer to
.
1.
CHECK STOP LAMP SWITCH
1. Ignition switch ON.
2. Check voltage between stop lamp switch connector E38 terminal 4 and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK GROUND CIRCUIT
1. Ignition switch OFF.
2. Disconnect CVT shift selector connector.
3. Check continuity between CVT shift selector connector M107 terminal 4 and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness.
3.
CHECK STOP LAMP SWITCH POWER CIRCUIT
Check voltage between stop lamp switch connector E38 terminal 3 and ground.
Stop lamp switch
Ground
Brake pedal
Voltage
Connector
Terminal
E38
4
Ground
Applied
Battery voltage
Released
0V
CVT shift selector
Ground
Continuity
Connector
Terminal
M107
4
Ground
Yes
SHIFT LOCK SYSTEM
TM-183
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Is the inspection result normal?
YES
>> Replace stop lamp switch. Refer to
.
NO
>> Repair or replace harness.
4.
CHECK CVT SHIFT SELECTOR POWER CIRCUIT
Check voltage between CVT shift selector connector M107 terminal 3 and ground.
Is the inspection result normal?
YES
>> Replace CVT shift selector. Refer to
TM-193, "Removal and Installation"
NO
>> Repair or replace harness or connector.
Component Inspection (CVT Shift Selector Assembly)
INFOID:0000000011279405
1.
CHECK CVT SHIFT SELECTOR ASSEMBLY (PART 1)
Check continuity between CVT shift selector connector terminals.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace CVT shift selector assembly. Refer to
TM-193, "Removal and Installation"
2.
CHECK CVT SHIFT SELECTOR ASSEMBLY (PART 2)
Apply voltage to terminals of CVT shift selector and check that shift lock solenoid is activated.
CAUTION:
• Connect the fuse between the terminals when applying the voltage.
• Never cause shorting between terminals.
Is the inspection result normal?
YES
>> Inspection End
NO
>> Replace CVT shift selector assembly. Refer to
TM-193, "Removal and Installation"
Component Inspection (Stop Lamp Switch)
INFOID:0000000011279406
1.
CHECK STOP LAMP SWITCH
Check continuity between the stop lamp switch connector terminals.
Stop lamp switch
Ground
Voltage
Connector
Terminal
E38
3
Ground
Battery voltage
CVT shift selector
Ground
Brake pedal
Voltage
Connector
Terminal
M107
3
Ground
Applied
Battery voltage
CVT shift selector
Condition
Continuity
Terminal
3 – 4
Shift the selector lever to “P” position.
Yes
Other than the above.
No
+ (fuse)
-
Condition
Status
Shift lock solenoid
Terminal
3
4
• Selector lever: “P” position
• Apply 12 V between terminals 3 and 4.
Shift lock solenoid operates
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст