Nissan Rogue. Manual — part 1079
B260F ENGINE STATUS
SEC-95
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
3.
REPLACE ECM
Replace ECM. Refer
EC-502, "Removal and Installation"
.
>> Inspection End
2015 Rogue NAM
SEC-96
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
B261E VEHICLE TYPE
B261E VEHICLE TYPE
Description
INFOID:0000000011278504
There are two types of vehicles.
• HEV
• Conventional
DTC Logic
INFOID:0000000011278505
DTC DETECTION LOGIC
NOTE:
• If DTC B261E is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
.
• If DTC B261E is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON under the following conditions.
-
Shift selector lever is in the P (Park) or N (Neutral) position
-
Do not depress brake pedal
2. Check “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011278506
1.
INSPECTION START
1. Turn ignition switch ON.
2. Check “Self Diagnostic Result” of “BCM” using CONSULT.
3. Touch “ERASE”.
4. Perform DTC Confirmation Procedure. Refer to
Is the 1st trip DTC B261E displayed again?
YES
>> GO TO 2.
NO
>> Inspection End.
2.
PERFORM BCM CONFIGURATION.
Perform the BCM configuration. Refer to
BCS-60, "ADDITIONAL SERVICE WHEN REPLACING CONTROL
.
>> GO TO 3.
3.
INSPECTION START
1. Turn ignition switch ON.
2. Check “Self Diagnostic Result” of “BCM” using CONSULT.
3. Touch “ERASE”.
4. Perform DTC Confirmation Procedure.
Refer to
Is the 1st trip DTC B261E displayed again?
YES
>> GO TO 4.
NO
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B261E
VEHICLE TYPE
Difference of BCM configuration.
• BCM mis-configuration
• Wrong ECM installed
2015 Rogue NAM
B261E VEHICLE TYPE
SEC-97
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
4.
CONFIRM ECM PART NUMBER.
Confirm the part number of the installed ECM is correct.
Is the ECM part number correct?
YES
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
NO
>> Replace ECM. Refer to
EC-502, "Removal and Installation"
2015 Rogue NAM
SEC-98
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
B26FC KEY REGISTRATION
B26FC KEY REGISTRATION
DTC Logic
INFOID:0000000011278507
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
2. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011278508
1.
REPLACE INTELLIGENT KEY
1. Prepare Intelligent Key that matches the vehicle.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
3. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
>> GO TO 2.
NO
>> Inspection End.
2.
REPLACE BCM
1. Replace BCM. Refer to
BCS-75, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B26FC
KEY REGISTRATION
Intelligent Key that does not match the vehicle is
registered.
• Improper registration operation
• Intelligent Key
• BCM
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст