Nissan Rogue. Manual — part 741
HA-32
< REMOVAL AND INSTALLATION >
COOLER PIPE AND HOSE
3. Remove the bolt (A) that retains the low-pressure flexible hose
to the low-pressure pipe.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
4. Remove low-pressure pipe bracket bolts (A) and bracket.
5. Release high-pressure pipe (2) from clamp (A).
6. Remove nut (B) and low-pressure pipe (1).
7. Remove the bolt (A) that retains the low-pressure and high-pressure pipe to the expansion valve (1).
CAUTION:
ALIIA0913ZZ
ALIIA0932ZZ
AWIIA1799ZZ
COOLER PIPE AND HOSE
HA-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
8. Remove low-pressure pipe.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten bolts to specified torque. Refer to
• Do not reuse O-rings.
• Apply A/C oil to new O-rings for installation.
• After charging refrigerant, check for leaks. Refer to
.
LOW-PRESSURE FLEXIBLE HOSE
LOW-PRESSURE FLEXIBLE HOSE : Removal and Installation
INFOID:0000000011279495
REMOVAL
1. Discharge the refrigerant. Refer to
2. Remove the bolt (A) that retains the low-pressure flexible hose
to the low-pressure pipe.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
3. Remove the nut (A) that retains the low-pressure flexible hose to the compressor.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
4. Remove the low-pressure flexible hose.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten nut/bolt to specified torque. Refer to
.
• Do not reuse O-rings.
ALIIA0935ZZ
ALIIA0913ZZ
ALIIA0914ZZ
HA-34
< REMOVAL AND INSTALLATION >
COOLER PIPE AND HOSE
• Apply A/C oil to new O-rings for installation.
• After charging refrigerant, check for leaks. Refer to
HIGH-PRESSURE PIPE
HIGH-PRESSURE PIPE : Removal and Installation
INFOID:0000000011279496
REMOVAL
1. Discharge the refrigerant. Refer to
2. Remove front bumper fascia. Refer to
EXT-17, "Removal and Installation"
.
3. Remove air duct assembly. Refer to
.
4. Remove bolts (A) and upper engine mount (1).
5. Release high-pressure pipe (2) from clamp (A).
(1): Low-pressure pipe
(B): Nut
6. Remove bolt (A) that retains high-pressure pipe (1) to the con-
denser (2).
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
ALIIA0933ZZ
AWIIA1799ZZ
ALIIA0938ZZ
COOLER PIPE AND HOSE
HA-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
7. Remove the bolt (A) that retains the high-pressure and low-pressure pipe to the expansion valve (1).
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
8. Remove high-pressure pipe.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten bolts to specified torque. Refer to
• Do not reuse O-rings.
• Apply A/C oil to new O-rings for installation.
• After charging the refrigerant, check for leaks. Refer to
.
HIGH-PRESSURE FLEXIBLE HOSE
HIGH-PRESSURE FLEXIBLE HOSE : Removal and Installation
INFOID:0000000011279497
REMOVAL
1. Discharge the refrigerant. Refer to
2. Remove front bumper fascia. Refer to
EXT-17, "Removal and Installation"
.
3. Remove the bolt (A) that retains the high-pressure flexible hose
(2) to the condenser (1).
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
4. Remove the bolt (A) that retains the high-pressure flexible hose (2) to the compressor (1).
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
ALIIA0935ZZ
ALIIA0937ZZ
ALIIA0936ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст