Nissan Rogue. Manual — part 740
HA-28
< PERIODIC MAINTENANCE >
PERFORMANCE TEST
Fresh air
High-pressure (Discharge side)
kPa (kg/cm
2
, psi)
Low-pressure (Suction side)
kPa (kg/cm
2
, psi)
Relative humidity
%
Air temperature
°C (°F)
50 – 70
25 (77)
909 – 1,112
(9.2 – 11.3, 131.8 – 161.2)
159 – 194
(1.6 – 2.0, 23.1 – 28.1)
30 (86)
1,073 -– 1,312
(10.9 – 13.4, 155.6 – 190.2)
211 – 259
(2.2 – 2.6, 30.6 – 37.6)
35 (95)
1,445 – 1,766
(14.7 – 18.0, 209.5 – 256.1)
247 – 300
(2.5 – 3.1, 35.8 – 43.5)
40 (104)
1,650 – 2,017
(16.8 – 20.6, 239.3 – 292.5)
290 – 355
(3.0 – 3.6, 42.1 – 51.5)
COMPRESSOR
HA-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
REMOVAL AND INSTALLATION
COMPRESSOR
Exploded View
INFOID:0000000011279491
Removal and Installation
INFOID:0000000011279492
REMOVAL
1. Discharge the refrigerant. Refer to
2. Remove the engine under cover. Refer to
EXT-37, "ENGINE UNDER COVER : Removal and Installation"
.
3. Release the drive belt from the compressor. Refer to
EM-15, "Removal and Installation"
.
NOTE:
Complete removal of the drive belt is not necessary.
4. Partially remove the front fender protector (RH). Refer to
EXT-28, "FENDER PROTECTOR : Removal and
.
5. Remove the nut (A) that retains the low-pressure flexible hose to
the compressor.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
1.
Compressor
ALIIA0972ZZ
ALIIA0914ZZ
HA-30
< REMOVAL AND INSTALLATION >
COMPRESSOR
6. Remove the bolt (A) that retains the high-pressure flexible hose
(2) to the compressor (1).
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
7. Disconnect the harness connectors from the compressor.
8. Remove bolts and compressor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten nut/bolt to specification. Refer to
• Do not reuse O-rings.
• Apply A/C oil to new O-rings for installation.
• After charging refrigerant, check for leaks. Refer to
• After installation, check the tension of the drive belt. Refer to
ALIIA0936ZZ
COOLER PIPE AND HOSE
HA-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
COOLER PIPE AND HOSE
Exploded View
INFOID:0000000011279493
LOW-PRESSURE PIPE
LOW-PRESSURE PIPE : Removal and Installation
INFOID:0000000011279494
REMOVAL
1. Discharge the refrigerant. Refer to
2. Remove bolts (A) and engine upper mount (1).
1.
Condenser
2.
High-pressure flexible hose
3.
Low-pressure flexible hose
4.
Low-pressure pipe
5.
Heating and cooling unit assembly
6.
High-pressure pipe
7.
Compressor
A.
O-ring
B.
Low-pressure service port
C.
High-pressure service port
ALIIA0912ZZ
ALIIA0933ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст