Nissan Rogue. Manual — part 91
AV-356
< SYMPTOM DIAGNOSIS >
[NAVIGATION WITH BOSE]
MULTI AV SYSTEM
Noise is mixed with audio.
Noise comes out from all speakers.
• Malfunction in AV control unit.
• Malfunction in Bose speaker amp.
Replace Bose speaker amp. Refer to
372, "Removal and Installation"
Noise comes out only from a certain speak-
er (front tweeter LH, front tweeter RH, cen-
ter speaker, front door speaker LH, front
door speaker RH, rear door speaker LH,
rear door speaker RH, subwoofer).
• Poor connector connection of speaker.
• Sound signal circuit malfunction between
AV control unit and Bose speaker amp.
Refer to:
-
(front
tweeter).
-
(center
speaker).
-
(front
door speaker).
-
(rear
door speaker).
-
(sub-
woofer).
• Sound signal circuit malfunction between
Bose speaker amp. and speaker.
Refer to:
-
(front
tweeter).
-
(center
speaker).
-
(front
door speaker).
-
(rear
door speaker).
-
(sub-
woofer).
• Malfunction in speaker.
Refer to:
-
AV-373, "Removal and Installation"
tweeter).
-
AV-375, "Removal and Installation"
(cen-
ter speaker).
-
AV-374, "Removal and Installation"
door speaker).
-
AV-376, "Removal and Installation"
(rear
door speaker).
-
AV-377, "Removal and Installation"
(sub-
woofer).
• Malfunction in AV control unit.
• Malfunction in Bose speaker amp.
Replace Bose speaker amp. Refer to
372, "Removal and Installation"
Noise is mixed with radio only (when the ve-
hicle hits a bump or while driving over bad
roads)
Poor connector connection of antenna or
antenna feeder.
Refer to
.
No radio reception or poor reception.
• Other audio sounds are normal.
• Any radio station cannot be received or
poor reception is caused even after mov-
ing to a service area with good reception
(e.g. a place with clear view and no ob-
stacles generating external noises).
• Antenna amp. ON signal circuit malfunc-
• Poor connector connection of antenna or
Symptoms
Check items
Probable malfunction location
AV
MULTI AV SYSTEM
AV-357
< SYMPTOM DIAGNOSIS >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RELATED TO HANDS-FREE PHONE
• Before performing diagnosis, confirm that the cellular phone being used by the customer is compatible with
the vehicle.
• It is possible that a malfunction is occurring due to a version change of the phone even though the phone is
a compatible type. This can be confirmed by changing the cellular phone to another compatible type, and
check that it operates normally. It is important to determine whether the cause of the malfunction is the vehi-
cle or the cellular phone.
Check Compatibility
1. Make sure the customer’s Bluetooth
®
related concern is understood.
2. Verify the customer’s concern.
NOTE:
The customer’s phone may be required, depending upon their concern.
3. Write down the customer’s phone brand, model and service provider.
NOTE:
It is necessary to know the service provider. On occasion, a given phone may be on the approved list with
one provider, but may not be on the approved list with other providers.
4. Go to “www.nissanusa.com/bluetooth/”.
a. Using the website’s search engine, find out if the customer’s phone is on the approved list.
b. If the customer’s phone is NOT on the approved list:
Stop diagnosis here. The customer needs to obtain a Bluetooth
®
phone that is on the approved list before
any further action.
c. If the feature related to the customer’s concern shows as “N” (not compatible):
Stop diagnosis here. If the customer still wants the feature to function, they will need to get an approved
phone showing the feature as “Y” (compatible) in the “Basic Features”.
d. If the feature related to the customer’s concern shows as “Y” (compatible):
Perform diagnosis as per the following table:
No satellite radio reception.
There is malfunction in the CONSULT self
diagnosis result.
Refer to
.
• Malfunction in antenna, antenna feeder
or AV control unit. Perform DTC diagno-
sis.
Refer to
.
• Poor continuity in antenna feeder.
• Poor connector connection of antenna or
antenna feeder.
Refer to
.
There is no malfunction in the CONSULT
self diagnosis result.
Refer to
.
• Poor continuity in antenna feeder.
• Poor connector connection of antenna or
antenna feeder.
• Loose satellite radio antenna mounting
nut.
Refer to
.
Buzz/rattle sound from speaker
The majority of buzz/rattle sounds are not
indicative of an issue with the speaker, usu-
ally something nearby the speaker is caus-
ing the buzz/rattle.
Refer to "SQUEAK AND RATTLE TROU-
BLE DIAGNOSIS" in the appropriate interi-
or trim section.
Symptoms
Check items
Probable malfunction location
AV-358
< SYMPTOM DIAGNOSIS >
[NAVIGATION WITH BOSE]
MULTI AV SYSTEM
RELATED TO NAVIGATION
RELATED TO AROUND VIEW MONITOR
Symptoms
Check items
Probable malfunction location
Does not recognize cellular phone connec-
tion (no connection is displayed on the dis-
play at the guide).
Repeat the registration of cellular phone.
Malfunction in AV control unit.
Replace AV control unit. Refer to
Hands-free phone cannot be established.
• Hands-free phone operation can be
made, but the communication cannot be
established.
• Hands-free phone operation can be per-
formed, however, voice between each
other cannot be heard during the conver-
sation.
The other party’s voice cannot be heard by
hands-free phone.
Check the “microphone speaker” in Inspec-
tion & Adjustment Mode if sound is heard.
Originating sound is not heard by the other
party with hands-free phone communica-
tion.
Sound operation function is normal.
Sound operation function does not work.
Microphone signal circuit malfunction.
Refer to
.
The system cannot be operated.
• The voice recognition can be controlled.
• Steering switch’s
,
, and
switch works, but
does not work.
Steering switch malfunction.
Replace steering switch. Refer to
Steering
switch’s , , ,
and
switches do not work.
Steering switch signal circuit malfunction.
Refer to
.
All steering switches do not work.
Steering switch ground circuit malfunction.
Refer to
.
Symptoms
Check items
Probable malfunction location
Navigation system is inoperative.
Navigation malfunction.
• Malfunction in SD card.
• Malfunction in AV control unit.
Steering switches malfunction.
Steering switch signal circuit malfunction.
Refer to
Voice activated control malfunction.
Microphone signal circuit malfunction.
Refer to
Steering switch signal circuit malfunction.
Refer to
Symptoms
Check items
Probable malfunction location
Display does not switch to camera
image when CAMERA switch is
pressed or selector lever is in R (re-
verse).
Around view monitor control unit mal-
function.
Around view monitor control unit power supply and
ground circuits malfunction.
Refer to
AV-331, "AROUND VIEW MONITOR CON-
TROL UNIT : Diagnosis Procedure"
.
Camera image signal circuit (output)
malfunction.
Camera image signal circuit (output) malfunction be-
tween around view monitor control unit and display
unit.
Refer to
AV-246, "WITHOUT DRIVER ASSISTANCE
.
Display switches to camera image
when CAMERA switch is pressed or
selector lever is in R (reverse), but
all views are not displayed.
Camera image signal circuit (input) mal-
function.
Camera image signal circuit (input) malfunction be-
tween camera and around view monitor control unit.
Refer to:
•
(front camera).
•
(rear camera).
•
(side camera LH).
•
(side camera RH).
AV
MULTI AV SYSTEM
AV-359
< SYMPTOM DIAGNOSIS >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Camera image is rolling.
Camera image signal circuit (output)
malfunction.
Camera image signal circuit (output) malfunction be-
tween around view monitor control unit and display
unit.
Refer to
AV-246, "WITHOUT DRIVER ASSISTANCE
Display does not switch to rear view
monitor even when selector lever is
in R (reverse).
Reverse signal circuit malfunction.
Reverse signal circuit between BCM and around view
monitor control unit.
Refer to
AV-246, "WITHOUT DRIVER ASSISTANCE
Predicted course line display in front
view and rear view is malfunction-
ing.
Steering angle sensor malfunction.
Predicted course line center position is malfunction-
ing.
Refer to
AV-284, "PREDICTED COURSE LINE CEN-
TER POSITION ADJUSTMENT : Work Procedure"
.
Front view and front of birds-eye
view is not displayed.
• Front camera malfunction.
• Front camera image signal circuit mal-
function.
• Front camera power supply and ground circuits
malfunction.
• Front camera image signal circuit malfunction be-
tween front camera and around view monitor con-
trol unit.
Refer to
.
Rear view and rear of birds-eye
view is not displayed.
• Rear view camera malfunction.
• Rear view camera image signal circuit
malfunction.
• Rear view camera power supply and ground cir-
cuits malfunction.
• Rear view camera image signal circuit malfunction
between rear view camera and around view moni-
tor control unit.
Refer to
.
Driver side of birds-eye view is not
displayed.
• Side camera LH malfunction.
• Side camera LH image signal circuit
malfunction.
• Side camera LH power supply and ground circuits
malfunction.
• Side camera LH image signal circuit malfunction
between side camera LH and around view monitor
control unit.
Refer to
.
Front-side and passenger side of
birds-eye view is not displayed.
• Side camera RH malfunction.
• Side camera RH image signal circuit
malfunction.
• Side camera RH power supply and ground circuits
malfunction.
• Side camera RH image signal circuit malfunction
between side camera RH and around view monitor
control unit.
Refer to
.
Selector lever is in a position other
than R (reverse) and front, rear,
front-side and Birds-Eye views are
displayed even as vehicle speed in-
creases.
Vehicle speed signal malfunction.
Vehicle speed signal malfunction between ABS actu-
ator and electric unit (control unit) and around view
monitor control unit.
Refer to
AV-246, "WITHOUT DRIVER ASSISTANCE
Symptoms
Check items
Probable malfunction location
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст