Nissan Rogue. Manual — part 654
B20CF HEADLAMP (HI) RH POWER SUPPLY CIRCUIT
EXL-245
< DTC/CIRCUIT DIAGNOSIS >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
B20CF HEADLAMP (HI) RH POWER SUPPLY CIRCUIT
DTC Logic
INFOID:0000000011280877
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF DIAGNOSTIC RESULT
With
CONSULT.
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result”.
Is DTC B20CF detected?
YES
>> Proceed to diagnosis procedure. Refer to
EXL-245, "Diagnosis Procedure"
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011280878
1.
CHECK HEAD LAMP SHORT CIRCUIT TO GROUND
1. Disconnect front combination lamp connector and IPDM E/R connector.
2. Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK HEAD LAMP SHORT CIRCUIT TO GROUND
1. Reconnect IPDM E/R connector.
2. Check continuity between front combination lamp harness connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
.
DTC
Display Item
Malfunction detected condition
Possible causes
B20CF
HL (HI) RH PWR SPLY CIRC
[CIRC SHORT TO GRND]
Short to ground
• IPDM E/R
• Short to ground
IPDM E/R
Ground
Continuity
Connector
Terminal
E217
54
No
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E240
5
No
EXL-246
< DTC/CIRCUIT DIAGNOSIS >
[LED HEADLAMP]
B20D0 HEADLAMP (LO) LH POWER SUPPLY CIRCUIT
B20D0 HEADLAMP (LO) LH POWER SUPPLY CIRCUIT
DTC Logic
INFOID:0000000011280879
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF DIAGNOSTIC RESULT
With
CONSULT.
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result”.
Is DTC B20D0 detected?
YES
>> Proceed to diagnosis procedure. Refer to
EXL-246, "Diagnosis Procedure"
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011280880
1.
CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
1. Disconnect front combination lamp connector and IPDM E/R connector.
2. Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
1. Reconnect IPDM E/R connector.
2. Check continuity between front combination lamp harness connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
DTC
Display Item
Malfunction detected condition
Possible causes
B20D0
HI (LO) RH PWR SPLY CIRC
[CIRC SHORT TO GRND]
Short to ground
• IPDM E/R
• Short to ground
IPDM E/R
Ground
Continuity
Connector
Terminal
E217
50
No
Front combination lamp
Ground
Continuity
Connector
Terminal
LH
E239
6
No
B20D1 HEADLAMP (LO) RH POWER SUPPLY CIRCUIT
EXL-247
< DTC/CIRCUIT DIAGNOSIS >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
B20D1 HEADLAMP (LO) RH POWER SUPPLY CIRCUIT
DTC Logic
INFOID:0000000011280881
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF DIAGNOSTIC RESULT
With
CONSULT.
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result”.
Is DTC B20D1 detected?
YES
>> Proceed to diagnosis procedure. Refer to
EXL-247, "Diagnosis Procedure"
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011280882
1.
CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
1. Disconnect front combination lamp connector and IPDM E/R connector.
2. Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
1. Reconnect IPDM E/R connector.
2. Check continuity between front combination lamp harness connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
.
DTC
Display Item
Malfunction detected condition
Possible causes
B20D1
HL (LO) RH PWR SPLY CIRC
[CIRC SHORT TO GRND]
Short to ground
• IPDM E/R
• Short to ground
IPDM E/R
Ground
Continuity
Connector
Terminal
E218
62
No
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E240
6
No
EXL-248
< DTC/CIRCUIT DIAGNOSIS >
[LED HEADLAMP]
B20D2 PARKING LAMP POWER SUPPLY CIRCUIT
B20D2 PARKING LAMP POWER SUPPLY CIRCUIT
DTC Logic
INFOID:0000000011429396
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF DIAGNOSTIC RESULT
With
CONSULT.
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result”.
Is DTC B20D2 detected?
YES
>> Proceed to diagnosis procedure. Refer to
EXL-248, "Diagnosis Procedure"
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011429397
1.
CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
1. Disconnect front combination lamp connectors and IPDM E/R connector.
2. Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
1. Reconnect IPDM E/R connector.
2. Check continuity between front combination lamp harness connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
DTC
Display Item
Malfunction detected condition
Possible causes
B20D2
PARKING LAMP PWR SPLY CIRC
[CIRC SHORT TO GROUND]
When a short to ground is detected in
the parking lamp power supply circuit.
• Short to ground
IPDM E/R
Ground
Continuity
Connector
Terminal
No
LH
E217
56
RH
E218
61
IPDM E/R
Ground
Continuity
Connector
Terminal
No
LH
E236
(parking lamp)
12
E235
(side marker lamp)
9
RH
E234
(parking lamp)
12
E233
(side marker lamp)
9
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст