Nissan Rogue. Manual — part 428
DMS-14
< BASIC INSPECTION >
[SPORT MODE]
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000011279917
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurs.
>> GO TO 2.
2.
CHECK SYMPTOM
• Check the symptom based on the information obtained from the customer.
• Check if any other malfunctions are present.
>> GO TO 3.
3.
DTC/SYSTEM DIGANOSIS
Perform a DTC/system diagnosis and repair or replace any malfunctioning part.
>> GO TO 4.
4.
FINAL CHECK
Check that the SPORT mode functions normally.
Does it operation normally?
YES
>> End of trouble diagnosis
NO
>> GO TO 2.
DMS
SPORT MODE SWITCH
DMS-15
< DTC/CIRCUIT DIAGNOSIS >
[SPORT MODE]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
DTC/CIRCUIT DIAGNOSIS
SPORT MODE SWITCH
Component Function Check
INFOID:0000000011279918
1.
CHECK SPORT MODE SWITCH OPERATION
1. Turn ignition switch ON.
2. Check SPORT mode indicator lamp turns ON/OFF on combination meter when turn SPORT mode switch
ON/OFF.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Proceed to
Diagnosis Procedure
INFOID:0000000011279919
1.
CHECK SPORT MODE SWITCH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect SPORT mode switch harness connector.
3. Turn ignition switch ON.
4. Check voltage between SPORT mode switch harness connector terminals.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> GO TO 2.
2.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check the continuity between SPORT mode switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace damaged parts.
3.
CHECK CIRCUIT BETWEEN COMBINATION METER AND SPORT MODE SWITCH (1)
1. Disconnect combination meter harness connector M76.
2. Check continuity between combination meter harness connector terminal and SPORT mode switch har-
ness connector terminal.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace damaged parts.
4.
CHECK CIRCUIT BETWEEN COMBINATION METER AND SPORT MODE SWITCH (2)
SPORT mode switch
Voltage (Ap-
prox.)
Connector
+
−
Terminal
M2
6
8
5 V
SPORT mode switch
—
Continuity
Connector
Terminal
M2
8
Ground
Existed
Combination meter
SPORT mode switch
Continuity
Connector
Terminal
Connector
Terminal
M76
29
M2
6
Existed
DMS-16
< DTC/CIRCUIT DIAGNOSIS >
[SPORT MODE]
SPORT MODE SWITCH
Check continuity between combination meter harness connector terminal and SPORT mode switch harness
connector terminal.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace damaged parts.
5.
CHECK COMBINATION METER INPUT/OUTPUT SIGNAL
1. Connect all of disconnected connectors.
2. Check input/output signal of combination meter. Refer to
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
6.
CHECK SPORT MODE SWITCH
Check SPORT mode switch. Refer to
DMS-16, "Component Inspection"
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace SPORT mode switch. Refer to
DMS-18, "Removal and Installation"
Component Inspection
INFOID:0000000011279920
1.
CHECK SPORT MODE SWITCH
Check continuity between SPORT mode switch connector terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace SPORT mode switch. Refer to
DMS-18, "Removal and Installation"
Combination meter
—
Continuity
Connector
Terminal
M76
29
Ground
Not existed
SPORT mode switch
Condition
Continuity
Terminal
6 – 8
SPORT mode switch is depressed.
Existed
SPORT mode switch is released.
Not existed
DMS
THE SPORT MODE INDICATOR LAMP DOES NOT TURN ON
DMS-17
< SYMPTOM DIAGNOSIS >
[SPORT MODE]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SYMPTOM DIAGNOSIS
THE SPORT MODE INDICATOR LAMP DOES NOT TURN ON
Description
INFOID:0000000011279921
The SPORT mode indicator lamp does not turn ON when the SPORT mode switch is operated.
Diagnosis Procedure
INFOID:0000000011279922
1.
CHECK SPORT MODE INDICATOR LAMP FUNCTION
Perform combination meter self-diagnosis mode and check test order 10. Refer to
.
Is the check result normal?
YES
>> GO TO 2.
NO
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
2.
CHECK DTC (TCM)
With CONSULT
1. Start the engine.
2. Check “Self Diagnostic Results” in “TRANSMISSION”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
.
NO
>> GO TO 3.
3.
CHECK DTC (ECM)
With CONSULT
Check “Self Diagnostic Results” in “ENGINE”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
NO
>> GO TO 4.
4.
CHECK DTC (COMBINATION METER)
With CONSULT
Check “Self Diagnostic Results” in “METER/M&A”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
NO
>> GO TO 5.
5.
CHECK COMBINATION METER INPUT/OUTPUT SIGNAL
With CONSULT
1. Select “Data Monitor” in “METER/M&A”.
2. Select “SPORT MODE IND”.
3. Check that “SPORT MODE IND” turns ON/OFF when SPORT mode switch is operated. Refer to
Is any DTC detected?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> GO TO 6.
6.
CHECK SPORT MODE SWITCH CIRCUIT
Check SPORT mode switch circuit. Refer to
Is any DTC detected?
YES
>> INSPECTION END
NO
>> Repair or replace malfunctioning parts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст