Nissan Rogue. Manual — part 823
IP-18
< REMOVAL AND INSTALLATION >
STEERING COLUMN COVERS
STEERING COLUMN COVERS
Removal and Installation
INFOID:0000000011280357
REMOVAL
1. Release gap hider (1) pawls from the steering column upper
cover (2).
: Pawl
2. Remove steering column cover screws (A)
NOTE:
Rotate steering wheel to access steering column cover screws.
3. Release steering column upper cover (1) pawls using a suitable
tool and remove.
: Pawl
4. Release steering column lower cover (2) pawl using a suitable
tool and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1383ZZ
ALJIA1382ZZ
CENTER CONSOLE ASSEMBLY
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000011280358
Removal and Installation
INFOID:0000000011280359
REMOVAL
1. Release clips and pawls using a suitable tool and remove center
console side finisher (1) (LH/RH).
: Pawl
: Clip
NOTE:
RH side shown; LH similar.
2. Remove shift selector knob. Refer to
3. Remove cluster lid C. Refer to
IP-22, "Removal and Installation"
1.
Center console cup holder (without
heated seats)
2.
Coin tray insert
3.
Center console cup holder (with
heated seats)
4.
Front heated seat switch (RH)
5.
Front heated seat switch (LH)
6.
Shift selector finisher
7.
Shift selector finisher mat
8.
Center console side finisher (RH)
9.
Center console side finisher (LH)
10. Center console tray
11. Center console bin mat
12. Center console rear brace finisher
13. Center console assembly
14. Rear center ventilator grille
15. Center console rear finisher
Metal clip
Clip
Pawl
AWJIA1306ZZ
ALJIA1395ZZ
IP-20
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
4. Release clips using a suitable tool and remove center console
rear finisher (1).
: Metal clip
5. Remove center console screws (A).
6. Disconnect the harness connectors and remove center console.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1393ZZ
ALJIA1468ZZ
CLUSTER LID A
IP-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID A
Removal and Installation
INFOID:0000000011280360
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-23, "Removal and Installation"
2. Remove instrument finisher A. Refer to
IP-15, "INSTRUMENT FINISHER A : Removal and Installation"
.
3. Remove instrument finisher B. Refer to
IP-16, "INSTRUMENT FINISHER B : Removal and Installation"
.
4. Release gap hider (1) pawls from the steering column upper
cover (2).
: Pawl
5. Release pawls using a suitable tool and remove cluster lid A.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1383ZZ
ALJIA1469ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст