Nissan Rogue. Manual — part 262
DAS
C1B93-00 ENGINE/HEV SYSTEM
DAS-219
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
C1B93-00 ENGINE/HEV SYSTEM
DTC Description
INFOID:0000000011277376
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Engine system
• ECM
• Chassis control module
FAIL-SAFE
The following functions are suspended:
• Active Ride Control (engine) function
• Active Trace Control function
• Active Engine Brake function
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1. Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1B93-00” detected?
YES
>> Proceed to
DAS-219, "Diagnosis Procedure"
NO-1 >> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2 >> Confirmation after repair: Inspection End.
Diagnosis Procedure
INFOID:0000000011277377
1.
CHECK ECM SYSTEM
With CONSULT
Perform “Self Diagnostic Result” of “ENGINE”.
Is DTC detected?
YES
>> Check the DTC. Refer to
.
NO
>> GO TO 2.
2.
PERFORM SELF-DIAGNOSIS
With CONSULT
1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.
2. Turn the ignition switch OFF and wait for 10 seconds or more.
3. Turn the ignition switch ON.
4. Perform “All DTC Reading”.
Is DTC “C1B93”, “U1000” or other DTC detected?
YES (“C1B93-00”)>>Replace the chassis control module. Refer to
DAS-286, "Removal and Installation"
.
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1B93-00
ENGINE/HEV SYSTEM
(Engine/HEV system)
When a malfunction is detected in ECM system.
DAS-220
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C1B93-00 ENGINE/HEV SYSTEM
YES (“U1000-00”)>>Refer to
DAS-260, "Diagnosis Procedure"
YES (other DTC)>>Check the DTC.
NO
>> Inspection End.
DAS
C1B94-00 TRANSMISSION SYSTEM
DAS-221
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
C1B94-00 TRANSMISSION SYSTEM
DTC Description
INFOID:0000000011277378
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Transmission system
• TCM
• Chassis control module
FAIL-SAFE
The following functions are suspended:
• Active Ride Control (engine) function
• Active Trace Control function
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1. Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1B94-00” detected?
YES
>> Proceed to
DAS-221, "Diagnosis Procedure"
NO-1 >> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2 >> Confirmation after repair: Inspection End.
Diagnosis Procedure
INFOID:0000000011277379
1.
CHECK TRANSMISSION SYSTEM
With CONSULT
Perform “Self Diagnostic Result” of “TRANSMISSION”.
Is DTC detected?
YES
>> Check the DTC. Refer to
NO
>> GO TO 2.
2.
PERFORM SELF-DIAGNOSIS
With CONSULT
1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.
2. Turn the ignition switch OFF and wait for 10 seconds or more.
3. Turn the ignition switch ON.
4. Perform “All DTC Reading”.
Is DTC “C1B94-00”, “U1000-00” or other DTC detected?
YES (“C1B94-00”)>>Replace the chassis control module. Refer to
DAS-286, "Removal and Installation"
.
YES (“U1000-00”)>>Refer to
DAS-260, "Diagnosis Procedure"
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1B94-00
TM SYSTEM
(Transmission system)
When a malfunction is detected in transmission system.
DAS-222
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C1B94-00 TRANSMISSION SYSTEM
YES (other DTC)>>Check the DTC.
NO
>> Inspection End.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст