Nissan Rogue. Manual — part 911
SQUEAK AND RATTLE TROUBLE DIAGNOSES
MIR-19
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
LAIA0071E
MIR-20
< REMOVAL AND INSTALLATION >
INSIDE MIRROR
REMOVAL AND INSTALLATION
INSIDE MIRROR
Exploded View
INFOID:0000000011280692
MANUAL ANTI-DAZZLING
AUTO ANTI-DAZZLING
Removal and Installation
INFOID:0000000011280693
MANUAL ANTI-DAZZLING
Removal
AWLIA2177ZZ
1.
Windshield glass
2.
Mirror base
3.
Inside mirror
AWLIA2289ZZ
1.
Windshield glass
2.
Mirror base
3.
Inside mirror
4.
Inside mirror finisher
A. Harness connector
B. Screw
INSIDE MIRROR
MIR-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
Hold inside mirror at the base and push upward, while using a suit-
able tool to release the pawl and remove.
CAUTION:
Use care when removing inside mirror to avoid damage to mir-
ror, mirror base or windshield glass.
Installation
Installation is in the reverse order of removal.
CAUTION:
Apply Genuine Mirror Adhesive or equivalent to bonding surface of mirror base if loose or removed.
Refer to
GI-22, "Recommended Chemical Products and Sealants"
.
AUTO ANTI-DAZZLING
Removal
1. Remove inside mirror finisher.
2. Disconnect the harness connector from the inside mirror.
3. Loosen screw and slide inside mirror upward to remove.
Installation
Installation is in the reverse order of removal.
CAUTION:
Apply Genuine Mirror Adhesive or equivalent to bonding surface of mirror base if loose or removed.
Refer to
GI-22, "Recommended Chemical Products and Sealants"
.
NOTE:
Perform the compass calibration procedure (if equipped with compass). Refer to
.
ALLIA1034ZZ
MIR-22
< REMOVAL AND INSTALLATION >
DOOR MIRROR
DOOR MIRROR
Exploded View
INFOID:0000000011280694
Removal and Installation
INFOID:0000000011280695
REMOVAL
1. Remove front door finisher. Refer to
INT-15, "Removal and Installation"
2. Release door mirror corner finisher clips using a suitable tool.
3. Disconnect the harness connector from the BSW indicator (if equipped), then remove the door mirror cor-
ner finisher.
4. Disconnect the harness connector from the door mirror.
5. Remove door mirror nuts and door mirror.
INSTALLATION
Installation is in the reverse order of removal.
1.
Door mirror
2.
Door mirror corner finisher
3.
Door mirror rear finisher
4.
Side turn signal lamp
5.
Side camera (if equipped)
6.
Door mirror actuator
7.
Door mirror glass
A.
Refer to INSTALLATION
Pawl
AWLIA2506ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст