Nissan Rogue. Manual — part 912
DOOR MIRROR
MIR-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
• For installation, tighten door mirror nuts to specification in the
sequence shown.
CAUTION:
Perform camera image calibration (if equipped with around view camera). Refer to
BRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Work Procedure"
.
Door mirror nuts
:5.74 N·m (0.59 kg-m, 51 in-lb)
ALLIA1605ZZ
MIR-24
< REMOVAL AND INSTALLATION >
DOOR MIRROR GLASS
DOOR MIRROR GLASS
Removal and Installation
INFOID:0000000011280696
REMOVAL
1. Release the metal clips and pawls that retain the door mirror
glass using a suitable tool, disconnect the harness connectors
(A) (if equipped) from the door mirror glass and remove.
: Metal clip
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, visually inspect that metal clips and pawls are securely engaged.
ALLIA1411ZZ
DOOR MIRROR ACTUATOR
MIR-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DOOR MIRROR ACTUATOR
Removal and Installation
INFOID:0000000011384896
REMOVAL
1. Remove door mirror glass. Refer to
MIR-24, "Removal and Installation"
2. Remove screws (A) from door mirror actuator (1).
3. Disconnect the harness connector from the door mirror actuator and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALLIA1615ZZ
MIR-26
< REMOVAL AND INSTALLATION >
DOOR MIRROR REAR FINISHER
DOOR MIRROR REAR FINISHER
Removal and Installation
INFOID:0000000011280697
REMOVAL
Beginning at the top of door mirror rear finisher and working around,
use a suitable tool to release the pawls and remove door mirror rear
finisher.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, visually check that all the pawls are securely engaged.
ALLIA1412ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст