Nissan Rogue. Manual — part 85
AV-332
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between around view monitor control unit connector M103 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair or replace harness or connectors.
WITH DRIVER ASSISTANCE SYSTEM
1.
CHECK FUSE
Check that the following fuses are not blown:
Are the fuses blown?
YES
>> Replace the blown fuse after repairing the affected circuit.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect around view monitor control unit connector M113.
3. Check voltage between around view monitor control unit connector M113 and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between around view monitor control unit connector M113 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair or replace harness or connectors.
Around view monitor control unit
Ground
Continuity
Connector
Terminal
M103
1
—
Yes
Terminal No.
Signal name
Fuse No.
2
Battery power supply
15 (20A)
Around view monitor control unit
Ground
Condition
Voltage
(Approx.)
Connector
Terminal
M113
2
—
Ignition switch: OFF
Battery voltage
Around view monitor control unit
Ground
Continuity
Connector
Terminal
M113
1
—
Yes
AV
FRONT TWEETER
AV-333
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT TWEETER
Diagnosis Procedure
INFOID:0000000011277006
Regarding Wiring Diagram information, refer to
.
1.
CONNECTOR CHECK
Check the AV control unit, Bose speaker amp. and speaker connectors for the following:
• Proper connection
• Damage
• Disconnected or loose terminals
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair the terminals or connectors.
2.
CHECK FRONT TWEETER SIGNAL CIRCUIT CONTINUITY (BOSE SPEAKER AMP.)
1. Disconnect Bose speaker amp. connectors and suspect front tweeter connector.
2. Check continuity between Bose speaker amp. connectors and suspect front tweeter connector.
3. Check continuity between Bose speaker amp. connectors and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK FRONT TWEETER SIGNAL (BOSE SPEAKER AMP.)
1. Connect Bose speaker amp. connectors and suspect front tweeter connector.
2. Turn ignition switch to ON.
3. Push AV control unit POWER switch.
4. Check signal between the terminals of Bose speaker amp. connectors.
Bose speaker amp.
Front tweeter
Continuity
Connector
Terminal
Connector
Terminal
B137
6
M80 (LH)
1
Yes
7
2
B138
37
M23 (RH)
1
27
2
Bose speaker amp.
Ground
Continuity
Connector
Terminal
B137
6
—
No
7
B138
37
27
Bose speaker amp.
Condition
Reference value
Connector
(+)
(
−)
Terminal
Terminal
AV-334
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
FRONT TWEETER
Is the inspection result normal?
YES
>> Replace front tweeter. Refer to
AV-373, "Removal and Installation"
NO
>> GO TO 4.
4.
CHECK FRONT TWEETER SIGNAL CIRCUIT CONTINUITY (AV CONTROL UNIT)
1. Turn ignition switch to OFF.
2. Disconnect Bose speaker amp. connector B138 and AV control unit connector M108.
3. Check continuity between Bose speaker amp. connector B138 and AV control unit connector M108.
4. Check continuity between Bose speaker amp. connector B138 and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness or connectors.
5.
CHECK FRONT TWEETER SIGNAL (AV CONTROL UNIT)
1. Connect Bose speaker amp. connector B138 and AV control unit connector M108.
2. Turn ignition switch to ON.
3. Push AV control unit POWER switch.
4. Check signal between AV control unit connector M108 and ground.
Is the inspection result normal?
B137
6
7
Audio signal output
B138
37
27
SKIB3609E
Bose speaker amp.
AV control unit
Continuity
Connector
Terminal
Connector
Terminal
B138
18
M108
2
Yes
32
3
19
11
20
12
Bose speaker amp.
Ground
Continuity
Connector
Terminal
B138
18
—
No
32
19
20
AV control unit connector M108
Condition
Reference value
(+)
(
−)
Terminal
Terminal
2
3
Audio signal output
11
12
SKIB3609E
AV
FRONT TWEETER
AV-335
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
YES
>> Replace Bose speaker amp. Refer to
AV-372, "Removal and Installation"
NO
>> Replace AV control unit. Refer to
AV-369, "Removal and Installation"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст