Nissan Rogue. Manual — part 374
DLK-338
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
KEY SWITCH (BCM INPUT)
KEY SWITCH (BCM INPUT)
Diagnosis Procedure
INFOID:0000000011279108
Regarding Wiring Diagram information, refer to
.
1.
CHECK KEY SWITCH INPUT SIGNAL
With CONSULT
Check key switch “KEY SW” in “Data Monitor”. Refer to
BCS-87, "DOOR LOCK : CONSULT Function (BCM -
.
• When key is inserted to ignition key cylinder:
• When key is removed from ignition key cylinder:
Without CONSULT
Check voltage between BCM connector M18 terminal 37 and ground.
Is the inspection result normal?
YES
>> Key switch (insert) circuit is OK.
NO
>> GO TO 2.
2.
CHECK KEY SWITCH (INSERT)
1. Turn ignition switch OFF.
2. Disconnect key switch connector.
3. Check continuity between key switch terminals.
Is the inspection result normal?
YES
>> Repair or replace harness or fuse.
NO
>> Replace key switch.
KEY SW
: ON
KEY SW
: OFF
Connector
Terminal
Condition
Voltage (V)
(Approx.)
(+)
(–)
M19
104
Ground
Key is inserted.
Battery voltage
Key is removed.
0
Terminals
Condition
Continuity
3 – 4
Key is inserted.
Yes
Key is removed.
No
2015 Rogue NAM
DOOR LOCK ACTUATOR
DLK-339
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK ACTUATOR
DRIVER SIDE
DRIVER SIDE : Component Function Check
INFOID:0000000011279109
1.
CHECK FUNCTION
1. Select “DOOR LOCK” of “BCM” using CONSULT.
2. Select “DOOR LOCK” in “Active Test”.
3. Touch “ALL LOCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-339, "DRIVER SIDE : Diagnosis Procedure"
.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000011279110
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front door lock assembly LH connector.
3. Check voltage between front door lock assembly LH harness connector and ground.
Is the inspection result normal?
YES
>> Replace front door lock assembly LH. Refer to
DLK-384, "DOOR LOCK : Removal and Installa-
.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM, all door lock actuator connectors.
2. Check continuity between BCM harness connector and front door lock assembly LH harness connector.
3. Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK BCM OUTPUT SIGNAL
(+)
(–)
Condition
Voltage
(Approx.)
Front door lock assembly LH
Connector
Terminal
D23
1
Ground
Door lock and unlock switch
Lock
Battery voltage
2
Unlock
BCM
Front door lock assembly LH
Continuity
Connector
Terminal
Connector
Terminal
M20
165
D23
1
Yes
172
2
BCM
Ground
Continuity
Connector
Terminal
M20
165
No
172
2015 Rogue NAM
DLK-340
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR LOCK ACTUATOR
1. Connect BCM connector.
2. Check voltage between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace front door lock assembly LH. Refer to
DLK-384, "DOOR LOCK : Removal and Installa-
.
NO
>> Replace BCM. Refer to
BCS-135, "Removal and Installation"
.
PASSENGER SIDE
PASSENGER SIDE : Component Function Check
INFOID:0000000011279111
1.
CHECK FUNCTION
1. Select “DOOR LOCK” of “BCM” using CONSULT.
2. Select “DOOR LOCK” in “Active Test”.
3. Touch “ALL LOCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-340, "PASSENGER SIDE : Diagnosis Procedure"
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000011279112
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front door lock actuator RH connector.
3. Check voltage between front door lock actuator RH harness connector and ground.
Is the inspection result normal?
YES
>> Replace front door lock actuator RH. Refer to
DLK-384, "DOOR LOCK : Removal and Installa-
.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM, all door lock actuator connectors.
2. Check continuity between BCM harness connector and front door lock actuator RH harness connector.
(+)
(–)
Condition
Voltage
(Approx.)
BCM
Connector
Terminal
M20
165
Ground
Door lock and unlock switch
Lock
Battery voltage
172
Unlock
(+)
(–)
Condition
Voltage
(Approx.)
Front door lock actuator RH
Connector
Terminal
D113
5
Ground
Door lock and unlock switch
Unlock
Battery voltage
6
Lock
BCM
Front door lock actuator RH
Continuity
Connector
Terminal
Connector
Terminal
M20
165
D113
5
Yes
163
6
2015 Rogue NAM
DOOR LOCK ACTUATOR
DLK-341
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK BCM OUTPUT SIGNAL
1. Connect BCM connector.
2. Check voltage between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace front door lock actuator RH. Refer to
DLK-384, "DOOR LOCK : Removal and Installa-
.
NO
>> Replace BCM. Refer to
BCS-135, "Removal and Installation"
.
REAR LH
REAR LH : Component Function Check
INFOID:0000000011279113
1.
CHECK FUNCTION
1. Select “DOOR LOCK” of “BCM” using CONSULT.
2. Select “DOOR LOCK” in “ACTIVE TEST”.
3. Touch “ALL LOCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-341, "REAR LH : Diagnosis Procedure"
.
REAR LH : Diagnosis Procedure
INFOID:0000000011279114
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear door lock actuator LH connector.
3. Check voltage between rear door lock actuator LH harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear door lock actuator LH. Refer to
DLK-388, "DOOR LOCK : Removal and Installation"
.
BCM
Ground
Continuity
Connector
Terminal
M20
165
No
163
(+)
(–)
Condition
Voltage
(Approx.)
BCM
Connector
Terminal
M20
165
Ground
Door lock and unlock switch
Unlock
Battery voltage
163
Lock
(+)
(–)
Condition
Voltage
(Approx.)
Rear door lock actuator LH
Connector
Terminal
D206
1
Ground
Door lock and unlock switch
Lock
Battery voltage
2
Unlock
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст