Nissan Rogue. Manual — part 327
DLK-150
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
OUTSIDE KEY ANTENNA (PASSENGER SIDE)
OUTSIDE KEY ANTENNA (PASSENGER SIDE)
Component Function Check
INFOID:0000000011278859
1.
CHECK OUTSIDE KEY ANTENNA (RH)
1. Place the Intelligent Key into the detection area of the outside key antenna (RH).
2. Press the door request switch (RH).
Does the door unlock?
YES
>> Inspection End.
NO
>> Refer to
DLK-150, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000011278860
Regarding Wiring Diagram information, refer to
.
1.
CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 1
1. Turn ignition switch OFF.
2. Check signal between BCM harness connector and ground using oscilloscope.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
NO
>> GO TO 2.
2.
CHECK OUTSIDE KEY ANTENNA CIRCUIT
1. Disconnect BCM connector and outside key antenna (RH) connector.
2. Check continuity between BCM harness connector and outside key antenna (RH) harness connector.
3. Check continuity between BCM harness connector and ground.
(+)
(–)
Condition
Signal
(Reference value)
BCM
Connector
Terminal
M19
118, 119
Ground
When the driver door
request switch is op-
erated with ignition
switch OFF.
When Intelligent Key
is in the antenna de-
tection area. (The dis-
tance between
Intelligent Key and
antenna: 80 cm or
less.)
When Intelligent Key
is not in the antenna
detection area. (The
distance between In-
telligent Key and an-
tenna: Approx. 2 m.)
JMKIA5955GB
JMKIA5954GB
BCM
Outside key antenna (RH)
Continuity
Connector
Terminal
Connector
Terminal
M19
119
D126
1
Yes
118
2
2015 Rogue NAM
OUTSIDE KEY ANTENNA (PASSENGER SIDE)
DLK-151
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 2
1. Replace outside key antenna (RH). (New antenna or other antenna)
2. Connect BCM connector and outside key antenna (RH) connector.
3. Check signal between BCM harness connector and ground using oscilloscope.
Is the inspection result normal?
YES
>> Replace outside key antenna (RH). Refer to
DLK-279, "PASSENGER SIDE : Removal and Instal-
.
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
BCM
Ground
Continuity
Connector
Terminal
M19
119
No
118
(+)
(–)
Condition
Signal
(Reference value)
BCM
Connector
Terminal
M19
118, 119
Ground
When the driver door
request switch is op-
erated with ignition
switch OFF.
When Intelligent Key
is in the antenna de-
tection area. (The dis-
tance between
Intelligent Key and
antenna: 80 cm or
less.)
When Intelligent Key
is not in the antenna
detection area. (The
distance between In-
telligent Key and an-
tenna: Approx. 2 m.)
JMKIA5955GB
JMKIA5954GB
2015 Rogue NAM
DLK-152
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
OUTSIDE KEY ANTENNA (DRIVER SIDE)
OUTSIDE KEY ANTENNA (DRIVER SIDE)
Component Function Check
INFOID:0000000011278861
1.
CHECK OUTSIDE KEY ANTENNA (LH)
1. Place the Intelligent Key into the detection area of the outside key antenna (LH).
2. Press the door request switch (LH).
Does the door unlock?
YES
>> Inspection End.
NO
>> Refer to
DLK-152, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000011278862
Regarding Wiring Diagram information, refer to
.
1.
CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 1
1. Turn ignition switch OFF.
2. Check signal between BCM harness connector and ground using oscilloscope.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
DLK-283, "Removal and Installation"
NO
>> GO TO 2.
2.
CHECK OUTSIDE KEY ANTENNA CIRCUIT
1. Disconnect BCM connector and outside key antenna (LH) connector.
2. Check continuity between BCM harness connector and outside key antenna (LH) harness connector.
3. Check continuity between BCM harness connector and ground.
(+)
(–)
Condition
Signal
(Reference value)
BCM
Connector
Terminal
M19
100, 120
Ground
When the driver door
request switch is oper-
ated with ignition
switch OFF.
When Intelligent Key
is in the antenna de-
tection area. (The dis-
tance between
Intelligent Key and an-
tenna: 80 cm or less.)
When Intelligent Key
is not in the antenna
detection area. (The
distance between In-
telligent Key and an-
tenna: Approx. 2 m.)
JMKIA5955GB
JMKIA5954GB
BCM
Outside key antenna (LH)
Continuity
Connector
Terminal
Connector
Terminal
M19
100
D11
1
Yes
120
2
2015 Rogue NAM
OUTSIDE KEY ANTENNA (DRIVER SIDE)
DLK-153
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 2
1. Replace outside key antenna (LH). (New antenna or other antenna)
2. Connect BCM connector and outside key antenna (LH) connector.
3. Check signal between BCM harness connector and ground using oscilloscope.
Is the inspection result normal?
YES
>> Replace outside key antenna (LH). Refer to
DLK-279, "DRIVER SIDE : Removal and Installation"
.
NO
>> Replace BCM. Refer to
DLK-283, "Removal and Installation"
BCM
Ground
Continuity
Connector
Terminal
M19
100
No
120
(+)
(–)
Condition
Signal
(Reference value)
BCM
Connector
Terminal
M19
100, 120
Ground
When the driver door
request switch is oper-
ated with ignition
switch OFF.
When Intelligent Key
is in the antenna de-
tection area. (The dis-
tance between
Intelligent Key and an-
tenna: 80 cm or less.)
When Intelligent Key
is not in the antenna
detection area. (The
distance between In-
telligent Key and an-
tenna: Approx. 2 m.)
JMKIA5955GB
JMKIA5954GB
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст