Nissan Rogue. Manual — part 933
MWI
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT DIS-
PLAY
MWI-79
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT
DISPLAY
Description
INFOID:0000000011279839
• The door open warning is displayed even though all of the doors are closed.
• The door open warning is not displayed even though a door is ajar.
Diagnosis Procedure
INFOID:0000000011279840
1.
CHECK BCM INPUT SIGNAL
Check the BCM input signal. Refer to
DLK-156, "Component Function Check"
(with Intelligent Key system) or
DLK-330, "Component Function Check"
(without Intelligent Key system).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK COMBINATION METER INPUT SIGNAL
1. Select “METER/M&A” using CONSULT.
2. Select “DOOR W/L” in “Data Monitor”.
3. Check the “DOOR W/L” status according to the following conditions:
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
3.
CHECK DOOR SWITCH SIGNAL CIRCUIT
Check the door switch signal circuit. Refer to
DLK-156, "Diagnosis Procedure"
(with Intelligent Key system) or
DLK-330, "Diagnosis Procedure"
(without Intelligent Key system).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness or connector.
4.
CHECK DOOR SWITCH
Check the door switch. Refer to
DLK-157, "Component Inspection"
(with Intelligent Key system) or
(without Intelligent Key system).
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Replace applicable door switch. Refer to
DLK-276, "Removal and Installation"
(with Intelligent Key
system) or
DLK-396, "Removal and Installation"
(without Intelligent Key system).
Monitor item
Condition
Status
DOOR W/L
Door open
On
Door closed
Off
MWI-80
< SYMPTOM DIAGNOSIS >
THE LIFTGATE OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT
DISPLAY
THE LIFTGATE OPEN WARNING CONTINUES DISPLAYING, OR DOES
NOT DISPLAY
Description
INFOID:0000000011279841
• The liftgate open warning is displayed continuously even though the liftgate is closed.
• The liftgate open warning is not displayed even though the liftgate is open.
Diagnosis Procedure
INFOID:0000000011279842
1.
CHECK BCM INPUT SIGNAL
Check the BCM input signal. Refer to
DLK-156, "Component Function Check"
(with Intelligent Key system) or
DLK-330, "Component Function Check"
(without Intelligent Key system).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK COMBINATION METER INPUT SIGNAL
1. Select “METER/M&A” using CONSULT.
2. Select “DOOR W/L” in “Data Monitor”.
3. Check the “DOOR W/L” status according to the following conditions:
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
3.
CHECK BACK DOOR SWITCH SIGNAL CIRCUIT
Check the back door switch signal circuit. Refer to
DLK-158, "Diagnosis Procedure (With Automatic Back
or
DLK-159, "Diagnosis Procedure (Without Automatic Back Door)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness or connector.
4.
CHECK BACK DOOR SWITCH
Check the back door switch. Refer to
DLK-160, "Component Inspection (With Automatic Back Door)"
161, "Component Inspection (Without Automatic Back Door)"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Replace back door switch. Refer to
DLK-270, "DOOR LOCK : Removal and Installation"
Monitor item
Condition
Status
DOOR W/L
Back door open
On
Back door closed
Off
MWI
THE METER CONTROL SWITCH IS INOPERATIVE
MWI-81
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE METER CONTROL SWITCH IS INOPERATIVE
Description
INFOID:0000000011279843
The meter control switches are inoperative when pressed.
Diagnosis Procedure
INFOID:0000000011279844
1.
CHECK METER CONTROL SWITCH SIGNAL
Check the meter control switch signal. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CHECK METER CONTROL SWITCH
Check the meter control switch. Refer to
MWI-70, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Replace meter control switch. Refer to
MWI-85, "Removal and Installation"
.
MWI-82
< SYMPTOM DIAGNOSIS >
THE STEERING SWITCHES ARE INOPERATIVE
THE STEERING SWITCHES ARE INOPERATIVE
Description
INFOID:0000000011279845
One or more of the steering switches to control the information display are inoperative.
Diagnosis Procedure
INFOID:0000000011279846
1.
CHECK STEERING SWITCH CIRCUIT
Check steering switch circuit. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CHECK STEERING SWITCH RESISTANCE
Check steering switch resistance. Refer to
MWI-71, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace steering switch. Refer to
AV-68, "Removal and Installation"
.
3.
CHECK SPIRAL CABLE
Check spiral cable for continuity. Refer to
MWI-71, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Replace spiral cable. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст