Nissan Rogue. Manual — part 87
AV-340
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
FRONT DOOR SPEAKER
YES
>> Replace Bose speaker amp. Refer to
AV-372, "Removal and Installation"
NO
>> Replace AV control unit. Refer to
AV-369, "Removal and Installation"
.
AV
REAR DOOR SPEAKER
AV-341
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REAR DOOR SPEAKER
Diagnosis Procedure
INFOID:0000000011277009
Regarding Wiring Diagram information, refer to
.
1.
CONNECTOR CHECK
Check the AV control unit, Bose speaker amp. and speaker connectors for the following:
• Proper connection
• Damage
• Disconnected or loose terminals
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair the terminals or connectors.
2.
CHECK REAR DOOR SPEAKER SIGNAL CIRCUIT CONTINUITY (BOSE SPEAKER AMP.)
1. Disconnect Bose speaker amp. connectors and suspect rear door speaker connector.
2. Check continuity between Bose speaker amp. connectors and suspect rear door speaker connector.
3. Check continuity between Bose speaker amp. connectors and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK REAR DOOR SPEAKER SIGNAL (BOSE SPEAKER AMP.)
1. Connect Bose speaker amp. connectors and suspect rear door speaker connector.
2. Turn ignition switch to ON.
3. Push AV control unit POWER switch.
4. Check signal between the terminals of Bose speaker amp. connectors.
Bose speaker amp.
Rear door speaker
Continuity
Connector
Terminal
Connector
Terminal
B137
1
D203 (LH)
1
Yes
10
2
2
D303 (RH)
1
3
2
Bose speaker amp.
Ground
Continuity
Connector
Terminal
B137
1
—
No
10
2
3
Bose speaker amp. connector B137
Condition
Reference value
(+)
(
−)
Terminal
Terminal
AV-342
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
REAR DOOR SPEAKER
Is the inspection result normal?
YES
>> Replace rear door speaker. Refer to
AV-376, "Removal and Installation"
.
NO
>> GO TO 4.
4.
CHECK REAR DOOR SPEAKER SIGNAL CIRCUIT CONTINUITY (AV CONTROL UNIT)
1. Turn ignition switch to OFF.
2. Disconnect Bose speaker amp. connector B138 and AV control unit connector M108.
3. Check continuity between Bose speaker amp. connector B138 and AV control unit connector M108.
4. Check continuity between Bose speaker amp. connector B138 and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness or connectors.
5.
CHECK REAR DOOR SPEAKER SIGNAL (AV CONTROL UNIT)
1. Connect Bose speaker amp. connector B138 and AV control unit connector M108.
2. Turn ignition switch to ON.
3. Push AV control unit POWER switch.
4. Check signal between AV control unit connector M108 and ground.
Is the inspection result normal?
1
10
Audio signal output
2
3
SKIB3609E
Bose speaker amp.
AV control unit
Continuity
Connector
Terminal
Connector
Terminal
B138
21
M108
4
Yes
22
5
23
13
33
14
Bose speaker amp.
Ground
Continuity
Connector
Terminal
B138
21
—
No
22
23
33
AV control unit connector M108
Condition
Reference value
(+)
(
−)
Terminal
Terminal
4
5
Audio signal output
13
14
SKIB3609E
AV
REAR DOOR SPEAKER
AV-343
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
YES
>> Replace Bose speaker amp. Refer to
AV-372, "Removal and Installation"
NO
>> Replace AV control unit. Refer to
AV-369, "Removal and Installation"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст