Nissan Rogue. Manual — part 1265
FRONT WIPER ARM
WW-63
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Adjustment
INFOID:0000000011280422
ALLIA1309ZZ
1.
Wiper blade (RH)
2.
Front fender (RH)
3.
Windshield glass
4.
Cowl top cover
5.
Wiper blade (LH)
C.
38.2
± 7.5 mm (1.50 ± 0.30 in)
D.
34.88
± 7.5 mm (1.37 ± 0.30 in)
WW-64
< REMOVAL AND INSTALLATION >
FRONT WIPER BLADE
FRONT WIPER BLADE
WIPER BLADE
WIPER BLADE : Exploded View
INFOID:0000000011280423
WIPER BLADE : Removal and Installation
INFOID:0000000011280424
REMOVAL
1. Move front wiper into the service position by turning the ignition switch ON, then quickly push the wiper
washer switch to the mist position two times within 0.5 seconds.
2. Turn the ignition switch OFF.
3. Lift the wiper arm and wiper blade away from the windshield glass.
4. Rotate the wiper blade and push the release tab (A), then move
the wiper blade down (B) the wiper arm.
CAUTION:
Be careful not to drop the wiper arm onto the windshield
glass.
5. Remove the wiper blade.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Insert the front wiper blade onto the front wiper arm until it clicks into place.
WIPER BLADE REFILL
1.
Wiper blade (RH)
2.
Wiper arm (RH)
3.
Wiper arm cover
4.
Front wiper drive assembly
5.
Wiper arm (LH)
6.
Wiper blade (LH)
AWLIA2294ZZ
AWLIA1565ZZ
FRONT WIPER BLADE
WW-65
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WIPER BLADE REFILL : Removal and Installation
INFOID:0000000011395501
REMOVAL
1. Remove the wiper blade. Refer to
WW-64, "WIPER BLADE : Removal and Installation"
.
2. Hold the wiper blade refill lip at the end (A) of the wiper blade (1)
with a suitable tool (B) as shown, and pull it firmly in the direction
(C).
(D): U clip (part of wiper blade)
• If the wiper blade refill lip is torn due to wear, insert a suitable
tool (A) into the space between the end of the wiper blade refill
(1) and the wiper blade (2) and pull the wiper blade refill (1) out
as shown.
INSTALLATION
1. If the rib (A) has become detached from the wiper blade refill (1),
check that the curve of the rib (A) is in the same direction as the
curve of the wiper blade refill (1) and insert the rib (A) into the slit
(B) in the wiper blade refill (1) as shown.
ALLIA0860ZZ
ALLIA0861ZZ
ALLIA0866ZZ
WW-66
< REMOVAL AND INSTALLATION >
FRONT WIPER BLADE
• If the rib (A) has a notch (B), insert the rib (A) into the wiper
blade refill (1) so the notch (B) fits over the protrusion (C) in
the wiper blade refill (1) as shown.
2. Insert the wiper blade refill (1) tip into the end of the wiper blade
(2) in the direction (C). Push the wiper blade refill (1) in while
pressing it into the end of the wiper blade (2) as shown. After the
wiper blade refill is fully inserted, remove the holder (B).
(A): Tab (part of wiper blade) (2)
• Make sure to slide the refill into the wiper blade so that the
wiper blade refill is held by the tabs (A) on the wiper blade as
shown.
ALLIA0867ZZ
ALLIA0862ZZ
ALLIA0863ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст