Nissan Rogue. Manual — part 360
DLK-282
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY BATTERY
INTELLIGENT KEY BATTERY
Removal and Installation
INFOID:0000000011279060
1. Release the lock knob on the back of the Intelligent Key and remove the key.
2. Insert a suitable tool (A) wrapped with a cloth into the slit of the
corner and twist it to separate the upper part from the lower part.
CAUTION:
• Do not insert a tool into the notches of the Intelligent Key
to pry it open, as this may damage the circuit board.
• Do not use excessive force when opening the intelligent
key, as this may result in damage to the internal compo-
nents.
• Do not touch the circuit board or battery terminal.
• The key fob is water-resistant. However, if it does get wet,
immediately wipe it dry.
3. Replace the battery with a new one.
4. Align the tips of the upper and lower parts, and then push them
together until unit is securely closed.
CAUTION:
• When replacing battery, keep dirt, grease, and other for-
eign materials off the electrode contact area.
• After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement
:Coin-type lithium battery
(CR2025)
PIIB6222E
2015 Rogue NAM
AUTOMATIC BACK DOOR CONTROL MODULE
DLK-283
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTOMATIC BACK DOOR CONTROL MODULE
Removal and Installation
INFOID:0000000011279061
REMOVAL
1. Remove the luggage side lower finisher (LH). Refer to
INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation - With Third Row Seat"
.
2. Disconnect the harness connectors from the automatic back door control module.
3. Remove nuts (A) and automatic back door control module (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Perform calibration of automatic back door position information. Refer to
.
ALKIA3347ZZ
2015 Rogue NAM
DLK-284
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
AUTOMATIC BACK DOOR MAIN SWITCH
AUTOMATIC BACK DOOR MAIN SWITCH
Exploded View
INFOID:0000000011491783
Removal and Installation
INFOID:0000000011492040
REMOVAL
1. Remove the instrument lower panel LH. Refer to
IP-23, "Removal and Installation"
.
2. Remove the screws and upper switch carrier from the instrument lower panel LH.
3. Release pawls using suitable tool and remove the automatic
back door main switch from the upper switch carrier.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
1.
Upper switch carrier
2.
Lower switch carrier
3. Blank
4.
Warning system switch
5.
AWD lock switch
6. Hill descent control switch
7.
Instrument lower panel LH
8.
Automatic back door main switch
9. Automatic back door switch
10. Sport mode switch
11. VDC OFF switch
ALJIA1521ZZ
ALJIA1522ZZ
2015 Rogue NAM
AUTOMATIC BACK DOOR SWITCH
DLK-285
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTOMATIC BACK DOOR SWITCH
Exploded View
INFOID:0000000011491749
Removal and Installation
INFOID:0000000011492048
REMOVAL
1. Remove the instrument lower panel LH. Refer to
IP-23, "Removal and Installation"
.
2. Remove the screws and upper switch carrier from the instrument lower panel LH.
3. Release pawls using suitable tool and remove the automatic
back door switch switch from the upper switch carrier.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
1.
Upper switch carrier
2.
Lower switch carrier
3. Blank
4.
Warning system switch
5.
AWD lock switch
6. Hill descent control switch
7.
Instrument lower panel LH
8.
Automatic back door main switch
9. Automatic back door switch
10. Sport mode switch
11. VDC OFF switch
ALJIA1521ZZ
ALJIA1522ZZ
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст