Nissan Qashqai J11. Manual — part 84
AIR CLEANER FILTER
EM-275
< PERIODIC MAINTENANCE >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
AIR CLEANER FILTER
Removal and Installation
INFOID:0000000010282054
REMOVAL
1.
Press the points (A) to separate air resonator from air duct and
air cleaner filter unit.
2.
Remove air resonator following the arrow.
3.
Unhook clips (1) on the air cleaner filter holder.
E1BIA1002ZZ
E1BIA1003ZZ
E1BIA1004ZZ
EM-276
< PERIODIC MAINTENANCE >
[K9K]
AIR CLEANER FILTER
4.
Separate air cleaner filter holder (1) from air cleaner filter unit
and remove air cleaner filter (2).
INSTALLATION
Install in the reverse order of removal.
E1BIA1005ZZ
DRIVE BELT AUTO-TENSIONER
EM-277
< REMOVAL AND INSTALLATION >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
REMOVAL AND INSTALLATION
DRIVE BELT AUTO-TENSIONER
Exploded View
INFOID:0000000010282057
WITH A/C
WITHOUT A/C
E1BIA0372GB
1.
Drive belt auto-tensioner
2.
Drive belt
3.
Multifunction bracket
E1BIA1196GB
1.
Drive belt auto-tensioner
2.
Multifunction bracket
3.
Drive beltt
4.
Idler pulley
5.
Idler pulley cover
6.
Cranshaft pulley
A.
EM-278
< REMOVAL AND INSTALLATION >
[K9K]
DRIVE BELT AUTO-TENSIONER
Removal and Installation
INFOID:0000000010282058
CAUTION:
• Replace any belt that has been removed with a new one.
• Auto-tensioner must be replaced with new ones when the belt is replaced.
• Do not run the engine without the drive belts to avoid damaging the crankshaft pulley.
REMOVAL
1.
Remove engine undercover.
2.
Remove RH front wheel.
3.
Remove right side splash cover.
4.
Remove drive belt. Refer to
EM-273, "Removal and Installation"
5.
Remove auto-tensioner.
6.
Remove idler pulley (Models without A/C only)
INSTALLATION
1.
Install auto-tensioner mounting bolt.
Align the notch and tighten mounting bolt.
2.
Install idler pulley (Models without A/C only)
3.
Install the drive belt. Refer to
EM-273, "Removal and Installation"
4.
Release drive belt auto-tensioner, and apply tension to drive belt.
5.
Turn crankshaft pulley clockwise several times to equalize tension between each pulley.
40.0 N·m (4.1 kg-m, 30 ft-lb)
MBIB0558E
40.0 N·m (4.1 kg-m, 30 ft-lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст