Nissan Qashqai J11. Manual — part 908
PB-14
< SYSTEM DESCRIPTION >
SYSTEM
• The parking brake cannot be released by just pushing the parking brake switch while the power switch is
OFF, the parking brake is applied, and the brake pedal is being depressed.
NOTE:
• Just pressing the parking brake switch does not release the parking brake.
• The parking brake can be released by: turning ON the power switch and pressing the parking brake switch
while depressing the brake pedal.
- For Key-IGN models:
• Parking brake can be released in key IN, even though ignistion is OFF.
- For Push-start models:
• Parking brake can be released in steering unlock, even though ignition is OFF.
• The electric parking brake indicator lamp turns OFF.
NOTE:
Braking force of the parking brake is in the hold status.
Automatic Release
• The parking brake automatically releases when vehicle is driving under the following conditions.
- Vehicle engine running status
- The seat belt (driver side) is fastened.
- The accelerator pedal is depressed.
• When release of the parking brake is completed, the electric parking brake indicator lamp turns OFF.
Driving
JSFIA2441GB
SYSTEM
PB-15
< SYSTEM DESCRIPTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
• When parking brake switch is pulled while driving, parking brake starts to operate, and electric parking brake
indicator lamp illuminates. When pulling operation is stopped, the parking brake operation is canceled and
electric parking brake indicator lamp turns OFF.
• When parking brake is pulled while driving immediately before the vehicle stops, the parking brake begins to
be applied and the electric parking brake indicator lamp turns ON.
NOTE:
The parking brake braking force is weaker than when the vehicle is stopped until the vehicle comes to a
stop.
• When parking brake switch is pulled after vehicle stop, parking brake starts to operate again, and electric
parking brake indicator lamp turns OFF.
• When the parking brake braking force reaches the prescribed value, the electric parking brake indicator
lamp turns ON.
CONDITION FOR OPERATION OF THE WARNING LAMP AND THE INDICATOR LAMP
Turns ON when power switch turns ON and turns OFF when the system is normal, for bulb check.
JSFIA1108GB
Condition (status)
Electric parking
brake indicator lamp
Master warning lamp
(yellow)
Master warning lamp
(red)
Meter text
Parking brake is operating
ON
OFF
OFF
—
When the parking brake switch is
pressed without depressing the
brake pedal.
ON
ON
OFF
Press brake pedal
When automatic release is per-
formed while the seat belt is not fas-
tened.
ON
OFF
OFF
Release parking brake
When the parking brake is dragging
while driving.
ON
OFF
ON
Release parking brake
When the parking brake braking
force is insufficient (vehicle is mov-
ing backward).
ON
OFF
ON
Press brake pedal
PB-16
< SYSTEM DESCRIPTION >
SYSTEM
• When parking brake switch is pulled while driving, parking brake starts to operate, and electric parking brake
indicator lamp illuminates. When pulling operation is stopped, the parking brake operation is canceled and
electric parking brake indicator lamp turns OFF.
• When parking brake is pulled while driving immediately before the vehicle stops, the parking brake begins to
be applied and the electric parking brake indicator lamp turns ON.
NOTE:
The parking brake braking force is weaker than when the vehicle is stopped until the vehicle comes to a
stop.
• When parking brake switch is pulled after vehicle stop, parking brake starts to operate again, and electric
parking brake indicator lamp turns OFF.
• When the parking brake braking force reaches the prescribed value, the electric parking brake indicator
lamp turns ON.
CONDITION FOR OPERATION OF THE WARNING LAMP AND THE INDICATOR LAMP
Turns ON when power switch turns ON and turns OFF when the system is normal, for bulb check.
JSFIA1108GB
Condition (status)
Electric parking
brake indicator lamp
Master warning lamp
(yellow)
Master warning lamp
(red)
Meter text
Parking brake is operating
ON
OFF
OFF
—
When the parking brake switch is
pressed without depressing the
brake pedal.
ON
ON
OFF
Press brake pedal
When automatic release is per-
formed while the seat belt is not fas-
tened.
ON
OFF
OFF
Release parking brake
When the parking brake is dragging
while driving.
ON
OFF
ON
Release parking brake
When the parking brake braking
force is insufficient (vehicle is mov-
ing backward).
ON
OFF
ON
Press brake pedal
SYSTEM
PB-17
< SYSTEM DESCRIPTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
Circuit Diagram
INFOID:0000000010318121
Fail-Safe
INFOID:0000000010318122
• The master warning lamp (yellow) turns ON when a malfunction with the system occurs.
• When parking brake switch is pulled/pushed during system malfunction, electric parking brake indicator
lamp blinks and master warning lamp (red) turns ON when electric parking brake cannot be operated. It
restricts braking and release operations of electric parking brake.
JSFIA1090GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст