Nissan Qashqai J11. Manual — part 906
PB-6
< PRECAUTION >
PRECAUTIONS
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
6.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
Precaution for Parking Brake System
INFOID:0000000010318112
WARNING:
Since dust covering the parking brake shoes and back plates has an affect on human body, the dust
must be removed with a dust collector. Never splatter the dust with an air blow gun.
• The electric parking brake indicator lamp turns ON while the electric parking brake is operating.
• When a malfunction occurs in the electric parking brake system, master warning lamp (yellow) turns ON.
CAUTION:
When vehicle is parked, press the select lever P range position switch into the P range.
• When parking brake switch is pulled/pushed under electric parking brake system malfunction, master warn-
ing lamp (red) turns ON when electric parking brake cannot be operated.
• When a malfunction occurs that prevents the parking brake from being released and the parking brake must
be released, manually release it.
PB-10, "Parking Brake Actuator"
.
• When parking brake must be released while the 12V battery negative terminal is disconnected, manually
PB-10, "Parking Brake Actuator"
.
• When parking brake shoe is ground or replaced, perform break-in operation. Refer to
Precaution for Harness Repair
INFOID:0000000010318113
• Solder the repair part, and wrap it with tape. [Twisted wire fray
must be 110 mm (4.33 in) or less.]
• Never bypass the repair point with wire. (If it is bypassed, the turn-
out point cannot be separated and the twisted wire characteristics
are lost.)
SKIB8766E
SKIB8767E
PREPARATION
PB-7
< PREPARATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000010318114
Tool name
Description
Power tool
Loosening bolts and nuts.
PBIC0190E
PB-8
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000010318114
Tool name
Description
Power tool
Loosening bolts and nuts.
PBIC0190E
DESCRIPTION
PB-9
< SYSTEM DESCRIPTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
SYSTEM DESCRIPTION
DESCRIPTION
Description
INFOID:0000000010318115
• The electric parking brake system is adopted.
• The electric parking brake system uses the signal from the parking brake switch to have the electric parking
brake control module operate the parking brake actuator to apply and release the parking brake.
• The parking brake switch is placed in the center console so that it can be operated close at hand (applied/
released).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст