Nissan Qashqai J11. Manual — part 1773
INTERIOR ROOM LAMP CIRCUIT
INL-57
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
INTERIOR ROOM LAMP CIRCUIT
Diagnosis Procedure
INFOID:0000000010430942
NOTE:
Before performing the diagnosis, check that the following items are normal.
• Interior room lamp power supply
• Map lamp bulb
• Room lamp bulb
• Personal lamp bulb
• Vanity mirror lamp bulb
1.
CHECK INTERIOR ROOM LAMP POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Remove interior room lamp relay.
3.
Disconnect following connectors.
-
Map lamp
-
Room lamp
-
Personal lamp
-
Vanity mirror lamp
4.
Check continuity between interior room lamp relay harness connector and each interior room lamp har-
ness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harnesses.
2.
CHECK INTERIOR ROOM LAMP GROUND CIRCUIT
Check continuity between each interior room lamp harness connector and ground.
Is the inspection result normal?
YES
>> Replace applicable interior room lamp.
NO
>> Repair or replace harnesses.
Interior room lamp relay
Each interior room lamp
Continuity
Connector
Terminal
Connector
Terminal
M80
7
Map lamp
R14
4
Existed
Room lamp
R7
4
Personal lamp LH
R9
2
Personal lamp RH
R10
2
Vanity mirror lamp LH
R12
1
Vanity mirror lamp RH
R13
1
Each interior room lamp
—
Continuity
Connector
Terminal
Map lamp
R14
3
Ground
Existed
Room lamp
R7
3
Personal lamp LH
R9
1
Personal lamp RH
R10
1
Vanity mirror lamp LH
R12
2
Vanity mirror lamp RH
R13
2
INL-58
< DTC/CIRCUIT DIAGNOSIS >
INTERIOR ROOM LAMP CONTROL CIRCUIT
INTERIOR ROOM LAMP CONTROL CIRCUIT
Component Function Check
INFOID:0000000010430911
NOTE:
Before performing the diagnosis, check that the following items are normal.
• Interior room lamp power supply
• Map lamp bulb
• Room lamp bulb
• Personal lamp bulb
1.
CHECK INTERIOR ROOM LAMP CONTROL FUNCTION
CONSULT ACTIVE TEST
1.
Switch the map lamp switch, room lamp switch or personal lamp switch to DOOR.
2.
Turn ignition switch ON.
3.
Select “INT LAMP” of BCM (INT LAMP) active test item.
4.
With operating the test items, check that each interior room lamp turns ON/OFF.
Does the interior room lamp turns ON/OFF?
YES
>> Interior room lamp control circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000010430912
1.
CHECK INTERIOR ROOM LAMP CONTROL OUTPUT
CONSULT ACTIVE TEST
1.
Turn ignition switch OFF.
2.
Disconnect following connectors.
-
Map lamp
-
Room lamp
-
Personal lamp
3.
Turn ignition switch ON.
4.
Select “INT LAMP” of BCM (INT LAMP) active test item.
5.
With operating the test item, check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Continuity exists and remains unchanged: GO TO 3.
NO-2
>> Continuity does not exist and remains unchanged: Replace BCM. Refer to
.
2.
CHECK INTERIOR ROOM LAMP CONTROL OPEN CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM connector.
3.
Check continuity between BCM harness connector and each interior room lamp harness connector.
On
: Interior room lamp gradual brightening
Off
: Interior room lamp gradual dimming
BCM
Ground
Test item
Continuity
Connector
Terminal
M68
138
INT LAMP
On
Existed
Off
Not existed
INTERIOR ROOM LAMP CONTROL CIRCUIT
INL-59
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
Is the inspection result normal?
YES
>> Replace applicable interior room lamp.
NO
>> Repair or replace harnesses.
3.
CHECK INTERIOR ROOM LAMP CONTROL SHORT CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM connector.
3.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-132, "Removal and Installation"
.
NO
>> Repair or replace harnesses.
BCM
Each interior room lamp
Continuity
Connector
Terminal
Connector
Terminal
M68
138
Map lamp
R14
2
Existed
Room lamp
R7
2
Personal lamp LH
R9
3
Personal lamp RH
R10
3
BCM
Ground
Continuity
Connector
Terminal
M68
138
Not existed
INL-60
< DTC/CIRCUIT DIAGNOSIS >
LUGGAGE ROOM LAMP CIRCUIT
LUGGAGE ROOM LAMP CIRCUIT
Component Function Check
INFOID:0000000010503097
NOTE:
Before performing the diagnosis, check that the following items are normal.
• Interior room lamp power supply
• Luggage room lamp bulb
1.
CHECK LUGGAGE ROOM LAMP OPERATION
CONSULT ACTIVE TEST
1.
Turn ignition switch ON.
2.
Select “TRUNK/LUGGAGE LAMP TEST” of BCM (INTELLIGENT KEY) active test item.
3.
With operating the test items, check that luggage room lamp turns ON/OFF.
Does luggage room lamp turns ON/OFF?
YES
>> Luggage room lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000010430944
1.
CHECK LUGGAGE ROOM LAMP POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Remove interior room lamp relay.
3.
Disconnect luggage room lamp connector.
4.
Check continuity between interior room lamp relay harness connector and luggage room lamp harness
connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harnesses.
2.
CHECK LUGGAGE ROOM LAMP OUTPUT
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO-1
>> Continuity exists and remains unchanged: GO TO 4.
NO-2
>> Continuity does not exist and remains unchanged: Replace BCM. Refer to
.
3.
CHECK LUGGAGE ROOM LAMP OPEN CIRCUIT
1.
Disconnect BCM connector.
2.
Check continuity between BCM harness connector and luggage room lamp harness connector.
On
: Luggage room lamp ON
Off
: Luggage room lamp OFF
Interior room lamp relay
Luggage room lamp
Continuity
Connector
Terminal
Connector
Terminal
M80
7
B49
1
Existed
BCM
Ground
Condition
Continuity
Connector
Terminal
B3
127
Back door
Open
Existed
Closed
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст