Nissan Qashqai J11. Manual — part 1220
SQUEAK AND RATTLE TROUBLE DIAGNOSES
DLK-149
< SYMPTOM DIAGNOSIS >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Diagnostic Worksheet
INFOID:0000000010434675
PIIB8740E
DLK-150
< SYMPTOM DIAGNOSIS >
[TYPE 1]
SQUEAK AND RATTLE TROUBLE DIAGNOSES
PIIB8742E
HOOD
DLK-151
< REMOVAL AND INSTALLATION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOVAL AND INSTALLATION
HOOD
Exploded View
INFOID:0000000010434676
HOOD ASSEMBLY
1.
Hood assembly
2.
Hood front seal
3.
Hood insulator
4.
Hood rod grommet
5.
Hood support rod
6.
Hood rod clamp
7.
Hood bumper rubber
8.
Hood hinge
9.
Radiator core seal
10. Hood bumper rubber
: Clip
: Pawl
: Body grease
,
: Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIB3292ZZ
DLK-152
< REMOVAL AND INSTALLATION >
[TYPE 1]
HOOD
HOOD ASSEMBLY : Removal and Installation
INFOID:0000000010434677
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
• Use protective tape or shop cloth to protect from damage during removal and installation.
REMOVAL
1.
Support hood assembly with the proper material to prevent it from falling.
WARNING:
Injury may occur if hood assembly is not supported with appropriate material when removing
hood assembly.
2.
Remove hood hinge mounting nuts, and then remove hood assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply touch-up paint to the body color if the paint around the hinge is peeled off during removal.
• After installing, perform hood fitting adjustment. Refer to
DLK-152, "HOOD ASSEMBLY : Adjust-
• Before installation of hood, apply anticorrosive agent onto the mounting surface of the hood hinge.
• Check hood hinge rotating part for poor lubrication. Refer to
DLK-155, "HOOD HINGE : Inspection"
HOOD ASSEMBLY : Adjustment
INFOID:0000000010434678
FITTING ADJUSTMENT
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст