Nissan Qashqai J11. Manual — part 1744
EXL-278
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN HEADLAMP]
PARKING LAMP CIRCUIT
Is the inspection result normal?
YES
>> Replace the corresponding front combination lamp. Refer to
EXL-318, "Removal and Installation"
.
NO
>> Repair or replace harness.
Front combination lamp
—
Continuity
Connector
Terminal
RH
E92
1
Ground
Existed
LH
E90
TAIL LAMP CIRCUIT
EXL-279
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
TAIL LAMP CIRCUIT
Component Function Check
INFOID:0000000010469978
1.
CHECK TAIL LAMP OPERATION
With CONSULT
1.
Select “TAIL LAMP” in “Active Test” mode of “IPDM E/R” using CONSULT.
2.
With operating the test items, check that the tail lamp is turned ON.
Is the inspection result normal?
YES
>> Tail lamp circuit is normal.
NO
>> Refer to
EXL-279, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000010469979
1.
CHECK TAIL LAMP OUTPUT VOLTAGE
With CONSULT
1.
Turn ignition switch OFF.
2.
Disconnect the following connectors.
-
Stop lamp / tail lamp LH (body side)
-
Stop lamp / tail lamp RH (body side)
-
Tail lamp LH (back door side)
-
Tail lamp RH (back door side)
3.
Turn ignition switch ON.
4.
Select “TAIL LAMP” in “Active Test” mode of “IPDM E/R” using CONSULT.
5.
With operating the test items, check voltage between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace IPDM E/R. Refer to
PCS-67, "Removal and Installation"
.
2.
CHECK TAIL LAMP POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between IPDM E/R harness connector and each tail lamp harness connector.
Body side
On
: Tail Lamp ON
Off
: Tail lamp OFF
+
-
Test item
Voltage
IPDM E/R
Connector
Terminal
RH
E37
17
Ground
TAIL LAMP
On
9 – 16 V
Off
0 – 1 V
LH
4
On
9 – 16 V
Off
0 – 1 V
IPDM E/R
Stop lamp / tail lamp (body side)
Continuity
Connector
Terminal
Connector
Terminal
RH
E37
17
B79
3
Existed
LH
4
B22
EXL-280
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN HEADLAMP]
TAIL LAMP CIRCUIT
Back door side
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK TAIL LAMP GROUND CIRCUIT
Check continuity between each tail lamp harness connector and ground.
Body side
Back door side
Is the inspection result normal?
YES
>> Replace the corresponding rear combination lamp. Refer to
EXL-330, "Removal and Installation"
.
NO
>> Repair or replace harness.
IPDM E/R
Tail lamp (back door side)
Continuity
Connector
Terminal
Connector
Terminal
RH
E37
17
D85
1
Existed
LH
4
B29
Stop lamp / tail lamp (body side)
—
Continuity
Connector
Terminal
RH
B79
2
Ground
Existed
LH
B22
Tail lamp (back door side)
—
Continuity
Connector
Terminal
Terminal
RH
D85
2
Ground
Existed
LH
B29
LICENSE PLATE LAMP CIRCUIT
EXL-281
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP CIRCUIT
Component Function Check
INFOID:0000000010469980
1.
CHECK TAIL LAMP LH OPERATION
Check that tail lamp LH is turned ON when lighting switch is turned 1ST.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Check tail lamp circuit. Refer to
EXL-279, "Component Function Check"
.
2.
CHECK LICENSE PLATE LAMP OPERATION
With CONSULT
1.
Select “TAIL LAMP” in “Active Test” mode of “IPDM E/R” using CONSULT.
2.
With operating the test items, check that the license plate lamp is turned ON.
Is the inspection result normal?
YES
>> License plate lamp circuit is normal.
NO
>> Refer to
EXL-281, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000010469981
1.
CHECK LICENSE PLATE LAMP POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector and license plate lamp connector.
3.
Check continuity between IPDM E/R harness connector and license plate lamp harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK LICENSE PLATE LAMP GROUND CIRCUIT
Check continuity between license plate lamp harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK LICENSE PLATE LAMP BULB
Check the applicable license plate lamp bulb.
Is the inspection result normal?
YES
>> Check the corresponding license plate lamp bulb socket. Repair or replace if necessary.
NO
>> Replace the corresponding license plate lamp bulb. Refer to
.
On
: License plate lamp ON
Off
: License plate lamp OFF
IPDM E/R
License plate lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E37
4
D97
1
Existed
LH
D96
License plate lamp
—
Continuity
Connector
Terminal
RH
D97
2
Ground
Existed
LH
D96
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст