Nissan Qashqai J11. Manual — part 460
ECK-400
< REMOVAL AND INSTALLATION >
[K9K]
THERMOPLUNGER CONTROL UNIT
THERMOPLUNGER CONTROL UNIT
Exploded View
INFOID:0000000010501146
Removal and Installation
INFOID:0000000010501147
REMOVAL
1.
Remove front bumper. Refer to
EXT-19, "Removal and Installation"
2.
Disconnect thermoplunger control unit harness connector.
3.
Remove thermoplunger control unit from bracket.
INSTALLATION
Install in the reverse order of removal.
1.
Bracket
2.
Thermoplunger control unit
: N·m (kg-m, ft-lb)
JSBIA5217GB
DC/DC CONVERTER
ECK-401
< REMOVAL AND INSTALLATION >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
DC/DC CONVERTER
Exploded View
INFOID:0000000010501148
NOTE:
The below figure shows LHD models. RHD models are the mirror image.
Removal and Installation
INFOID:0000000010501149
REMOVAL
1.
Disconnect battery negative terminal. Refer to
ECK-9, "Precautions for Removing Battery Terminal"
.
2.
Remove glove box cover. Refer to
3.
Disconnect DC/DC converter harness connectors.
4.
Remove DC/DC converter bracket mounting screws.
5.
Remove bracket with DC/DC converter.
6.
Remove DC/DC converter mounting nuts.
7.
Remove DC/DC converter.
INSTALLATION
Install in the reverse order of removal.
1.
DC/DC converter
2.
Bracket
: N·m (kg-m, in-lb)
: Vehicle front
JSBIA4865GB
ECK-402
< REMOVAL AND INSTALLATION >
[K9K]
ENGINE RESTART BYPASS RELAY
ENGINE RESTART BYPASS RELAY
Exploded View
INFOID:0000000010501150
Removal and Installation
INFOID:0000000010501151
REMOVAL
1.
Remove battery, battery cover and battery tray. Refer to
PG-155, "Removal and Installation"
.
2.
Disconnect engine restart bypass relay harness connectors.
3.
Remove bracket with engine restart bypass relay.
INSTALLATION
Install in the reverse order of removal.
1.
Engine restart bypass relay
2.
Battery mounting bracket
: N·m (kg-m, ft-lb)
JSBIA5193GB
FUEL PUMP CONTROL MODULE (FPCM)
ECK-403
< REMOVAL AND INSTALLATION >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
FUEL PUMP CONTROL MODULE (FPCM)
Exploded View
INFOID:0000000010501152
Removal and Installation
INFOID:0000000010501153
REMOVAL
1.
Remove luggage side finisher (RH). Refer to
2.
Remove bracket with fuel pump control module (FPCM).
3.
Disconnect fuel pump control module (FPCM) harness connectors.
4.
Remove cover and fuel pump control module (FPCM) from bracket.
INSTALLATION
Install in the reverse order of removal.
1.
Bracket
2.
Fuel pump control module (FPCM)
3.
Cover
: N·m (kg-m, in-lb)
JSBIA4867GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст