Nissan Qashqai J11. Manual — part 459
ECK-396
< PERIODIC MAINTENANCE >
[K9K]
IDLE SPEED
PERIODIC MAINTENANCE
IDLE SPEED
Inspection
INFOID:0000000010290073
1.
CHECK IDLE SPEED
With CONSULT
Check “ENGINE SPEED” in “DATA MONITOR” mode with CONSULT.
>> INSPECTION END
Idle speed:
VACUUM LINES
ECK-397
< REMOVAL AND INSTALLATION >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
REMOVAL AND INSTALLATION
VACUUM LINES
Vacuum Layout
INFOID:0000000010501141
CAUTION:
Do not use soapy water or any type of solvent while installing vacuum hose.
1.
TC boost control solenoid valve
2.
Vacuum pump
3.
TC boost control actuator
JSBIA4849ZZ
ECK-398
< REMOVAL AND INSTALLATION >
[K9K]
ECM
ECM
Exploded View
INFOID:0000000010501142
Removal and Installation
INFOID:0000000010501143
CAUTION:
Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to
REMOVAL
1.
Disconnect battery negative terminal.
2.
Remove air duct (inlet). Refer to
EM-380, "Removal and Installation"
.
3.
Disconnect ECM harness connectors.
4.
Remove battery, battery cover and battery tray. Refer to
PG-155, "Removal and Installation"
.
5.
Remove bracket A with ECM.
6.
Remove ECM from bracket B.
INSTALLATION
Install in the reverse order of removal.
1.
Battery mounting bracket
2.
Bracket A
3.
Bracket B
4.
ECM
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
JSBIA5191GB
GLOW CONTROL UNIT
ECK-399
< REMOVAL AND INSTALLATION >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
GLOW CONTROL UNIT
Exploded View
INFOID:0000000010501144
Removal and Installation
INFOID:0000000010501145
REMOVAL
1.
Remove front bumper. Refer to
EXT-19, "Removal and Installation"
2.
Disconnect glow control unit harness connector.
3.
Remove glow control unit from bracket.
INSTALLATION
Install in the reverse order of removal.
1.
Glow control unit
2.
Bracket
: N·m (kg-m, ft-lb)
JSBIA5215GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст