Nissan Qashqai J11. Manual — part 767
FLUID COOLER SYSTEM
TM-643
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Vehicle side (Type A)
JSDIA5223GB
Bumper reinforcement
Bracket
Bracket
CVT fluid cooler
Hose clamp
CVT fluid cooler hose D
CVT fluid cooler tube assembly B
Bumper reinforcement lower
CVT fluid cooler hose C
CVT fluid cooler hose E
Bracket
CVT fluid cooler tube assembly A
CVT fluid cooler hose F
CVT fluid cooler hose B
Front side member LH
Transaxle assembly
CVT oil warmer
CVT fluid cooler tube A
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
TM-644
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
FLUID COOLER SYSTEM
Vehicle side (Type B)
Removal and Installation
INFOID:0000000010248022
REMOVAL
WARNING:
Do not remove the radiator cap when the engine is hot. Serious burns could occur from high-pressure
engine coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly push down and
turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by pushing it down
and turning it all the way.
CAUTION:
Perform these steps after the engine coolant temperature has cooled sufficiently.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
1.
Remove the front bumper. Refer to
EXT-19, "Removal and Installation"
.
2.
Remove the engine undercover.
JSDIA5224GB
Bumper reinforcement
Bracket
Bracket
CVT fluid cooler
Hose clamp
CVT fluid cooler hose D
CVT fluid cooler tube assembly B
CVT fluid cooler hose C
CVT fluid cooler hose E
Bracket
Radiator core support
CVT fluid cooler hose F
CVT fluid cooler tube assembly A
CVT fluid cooler hose B
Transaxle assembly
CVT oil warmer
CVT fluid cooler tube A
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.
FLUID COOLER SYSTEM
TM-645
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
3.
Remove the battery. Refer to
PG-155, "Removal and Installation"
.
4.
Remove the ECM (TCM) bracket and ECM (TCM). Refer to
TM-625, "Removal and Installation"
5.
Remove the battery mounting bracket assembly and battery mounting bracket. Refer to
6.
Remove the harness bracket mounting nuts (
) and remove
the harness bracket
from the vehicle.
7.
Remove hose clamps of CVT cooler hose F and B to remove the
hose on the CVT oil warmer side.
8.
Remove hose clamp (
) of CVT fluid cooler
to remove the
hose on the CVT fluid cooler side.
9.
Remove bracket mounting nut (
) to remove CVT cooler hose
B, C, E, and F together with CVT fluid cooler tube assembly A.
10. Remove the bracket mounting bolts (
) and remove the CVT
fluid cooler from the vehicle.
11. Remove CVT fluid cooler hose D.
12. Remove the fluid cooler tube assembly B from CVT fluid cooler.
13. Remove hose clamp of CVT cooler hose A to remove the hose
on the CVT oil warmer side.
14. Remove CVT fluid cooler tube A and CVT fluid cooler tube B.
INSTALLATION
Installation is in the reverse order of removal.
Transaxle side
JSDIA5410ZZ
JSDIA5412ZZ
JSDIA5413ZZ
JSDIA5414ZZ
TM-646
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
FLUID COOLER SYSTEM
Refer to the followings when installing CVT fluid cooler hose.
• When installing fluid cooler tube A
and fluid cooler tube B
to
transaxle assembly.
- Contact fluid cooler tube A stopper
to transaxle case boss
.
- Contact fluid cooler tube B stopper
to transaxle case boss
.
• Refer to the followings when installing CVT fluid cooler hose.
CAUTION:
Never reuse hose clamps.
• Refer to the followings when installing hose clamp.
CAUTION:
Hose clamp should not interfere with the bulge of tube.
Vehicle side
• Refer to the followings when installing CVT fluid cooler hose.
CAUTION:
• Be careful not to damage CVT fluid cooler.
• Do not reuse hose clamps.
JSDIA5425ZZ
Hose
Installation side
tube
Direction of paint mark
Hose insertion depth
"A"
CVT fluid
cooler hose
A
CVT oil warmer
Upward
Hose end reaches the
end of tube.
CVT fluid cooler
tube B
Frontward
SCIA7203E
Hose
Installation side
tube
Hose clamp
Direction of tab
Clamping position
CVT fluid
cooler hose
A
CVT oil warmer
Upward and 45
°
rightward
5 – 9 mm (0.20 – 0.35 in)
(A) from hose end
CVT fluid cooler
tube B
Frontward
JSDIA2424ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст