Nissan Qashqai J11. Manual — part 766
DIFFERENTIAL SIDE OIL SEAL
TM-639
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Install each differential side oil seal evenly using Tool so that differ-
ential side oil seal protrudes by the dimension (C) and (D) respect-
fully.
NOTE:
The reference is the installation direction of the differential side oil seal.
Drift to be used:
Inspection and Adjustment
INFOID:0000000010245701
INSPECTION AFTER INSTALLATION
Drive the vehicle and check visually that there is no leakage of CVT fluid.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
: Differential side oil seal (left side)
: Differential side oil seal (right side)
ALDIA0400ZZ
Dimension (C)
:Height difference from case end surface is within 1.8
±
0.5 mm (0.071
±
0.020 in).
Dimension (D)
:Height difference from case end surface is within 2.2
±
0.5 mm (0.087
±
0.020 in).
Location
Commercial Service Tools
Transaxle case side
Commercial service tool with outer dia. 56 mm (2.20 in) and in-
ner dia. 50 mm (1.97 in)
Converter housing side
TM-640
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
WATER HOSE
WATER HOSE
Exploded View
INFOID:0000000010248018
Removal and Installation
INFOID:0000000010248019
REMOVAL
WARNING:
Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure
coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to
allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION:
Perform when the engine is cold.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
1.
Remove the battery. Refer to
PG-155, "Removal and Installation"
.
2.
Remove the ECM (TCM) bracket and ECM (TCM). Refer to
TM-625, "Removal and Installation"
3.
Remove the battery mounting bracket assembly and battery mounting bracket. Refer to
4.
Remove the harness bracket mounting nuts (
) and remove
the harness bracket
from the vehicle.
5.
Remove the engine undercover.
6.
Release hose clamps and remove CVT water hose.
CAUTION:
Do not reuse hose clamps.
INSTALLATION
Installation is in the reverse order of removal.
Hose clamp
Water hose A
Radiator hose assembly
Water hose B
CVT oil warmer
Transaxle assembly
: Always replace after every disassembly.
JSDIA5221ZZ
JSDIA5410ZZ
WATER HOSE
TM-641
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CAUTION:
Do not reuse hose clamps.
•
• Refer to the followings when installing hose clamp.
CAUTION:
• Hose clamp should not interfere with the bulge of tube.
Inspection
INFOID:0000000010248020
INSPECTION AFTER INSTALLATION
Start and warm up the engine. Visually check that there is no leakage of engine coolant and CVT fluid.
Hose
Installation side tube
Direction of paint mark
Hose insertion depth “L”
Water hose A
CVT oil warmer
Frontward
: End reaches the 2-stage
bulge.
Radiator hose assembly
Frontward
: Hose end reaches the end
of radiator hose assembly tube.
Water hose B
CVT oil warmer
Upward
: End reaches the 2-stage
bulge.
Radiator hose assembly
Frontward
: Hose end reaches the end
of radiator hose assembly tube.
ALDIA0475ZZ
Hose
Installation side tube
Hose clamp
Direction of tab
Clamping position
Water hose A
CVT oil warmer
Frontward
5 – 7 mm (0.20 – 0.28
in) (A) from hose end
Radiator hose as-
sembly
Rearward
Water hose B
CVT oil warmer
Leftward
Radiator hose as-
sembly
Rearward
JSDIA2424ZZ
TM-642
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
FLUID COOLER SYSTEM
FLUID COOLER SYSTEM
Exploded View
INFOID:0000000010248021
INFORMATION
GI-24, "Information About Identification or Model Code"
to identify a production plant.
Transaxle side
Service information
Destination
Type A
Except for Russia production models
Type B
Russia production models
JSDIA5222GB
CVT fluid cooler tube A
Copper washer
CVT fluid cooler hose A
Hose clamp
CVT fluid cooler tube B
CVT oil warmer
Transaxle assembly
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст