Nissan Qashqai J11. Manual — part 706
PRIMARY SPEED SENSOR
TM-399
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
PRIMARY SPEED SENSOR
Exploded View
INFOID:0000000010589385
Removal and Installation
INFOID:0000000010589386
REMOVAL
1.
Turn ignition switch OFF.
2.
Remove hoodledge splashguard (LH). Refer to
3.
Disconnect primary speed sensor.
4.
Remove mounting bolt (
) and remove primary speed sensor
from transaxle assembly.
Transaxle assembly
Primary speed sensor
O-ring
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Apply CVT fluid
JSDIA5141GB
JSDIA5198ZZ
TM-400
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
PRIMARY SPEED SENSOR
5.
Remove O-ring
from primary speed sensor.
INSTALLATION
Note the followings and installation is in the reverse order of removal.
CAUTION:
• Never reuse O-ring.
• Apply CVT fluid to the O-ring.
Inspection and Adjustment
INFOID:0000000010589387
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid.
ADJUSTMENT AFTER INSTALLATION
If CVT fluid leaks during work, adjust the CVT fluid level. Refer to
.
JSDIA5199ZZ
OUTPUT SPEED SENSOR
TM-401
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
OUTPUT SPEED SENSOR
Exploded View
INFOID:0000000010589388
Removal and Installation
INFOID:0000000010589389
REMOVAL
1.
Turn ignition switch OFF.
2.
Disconnect output speed sensor connector.
3.
Remove mounting bolt (
) and remove output speed sensor
from transaxle assembly.
4.
Remove O-ring
from output speed sensor.
Transaxle assembly
Output speed sensor
O-ring
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Apply CVT fluid
JSDIA5033GB
JSDIA5201ZZ
JSDIA5199ZZ
TM-402
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
OUTPUT SPEED SENSOR
INSTALLATION
Note the followings and installation is in the reverse order of removal.
CAUTION:
• Never reuse O-ring.
• Apply CVT fluid to the O-ring.
Inspection and Adjustment
INFOID:0000000010589390
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid.
ADJUSTMENT AFTER INSTALLATION
If CVT fluid leaks during work, adjust the CVT fluid level. Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст