Nissan Qashqai J11. Manual — part 1430
SYSTEM
SEC-19
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
NISSAN ANTI-THEFT SYSTEM : System Description
INFOID:0000000010337875
SYSTEM DIAGRAM
BCM INPUT/OUTPUT SIGNAL CHART
Input Signal Item
JMKIB3225GB
Transmit unit
Signal name
ECM
CAN communication
• Engine status signal
• Starter control relay request signal
IPDM E/R
• Push-button ignition switch status signal
• Ignition ON signal
• Starter relay/Starter control relay status signal
• Starter control relay status signal
• Neutral position signal
Combination meter
Vehicle speed signal (Meter)
ABS actuator and electric unit (control unit)
Vehicle speed signal (ABS)
Steering lock unit
• Steering lock unit lock status signal
• Steering lock unit unlock status signal
• Lock/unlock position signal
• Steering lock undefined position signal
• Steering lock wrong code signal
NATS antenna amp.
Key ID signal
SEC-20
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM
Output Signal Item
SYSTEM DESCRIPTION
• The Nissan Anti-Theft System (NATS) prevents the engine from being started by Intelligent Key whose ID is
not registered to the vehicle (BCM). It has higher protection against auto theft involving the duplication of
mechanical keys.
• The ignition key integrated in the Intelligent Key cannot start the engine. When the Intelligent Key battery is
discharged, the NATS ID verification is performed between the transponder integrated with Intelligent Key
and BCM via NATS antenna amp. when the Intelligent Key backside is contacted to push-button ignition
switch while brake pedal is depressed. If the verification result is OK, the engine start operation can be per-
formed by the push-button ignition switch operation.
• Locate the security indicator lamp and always blinks it when the ignition switch is in any position except ON
to warn that the vehicle is equipped with Nissan Anti-Theft System (NATS).
• Up to 4 Intelligent Keys can be registered (including the standard ignition key) upon request from the owner.
• When replacing ECM, BCM or Intelligent Key, the specified procedure (Initialization and registration) using
CONSULT is required.
PRECAUTIONS FOR KEY REGISTRATION
The ID registration is a procedure that erases the current NATS ID once, and then registers a new ID. There-
fore before starting the registration operation, collect all registered Intelligent Keys from the customer.
SECURITY INDICATOR LAMP
• Security indicator lamp warns that the vehicle is equipped with NATS.
• Security indicator lamp always blinks when the ignition switch is in any position other than ON.
NOTE:
Because security indicator lamp is highly efficient, the battery is barely affected.
ENGINE START OPERATION WHEN INTELLIGENT KEY IS CONTACTED TO PUSH-BUTTON IG-
NITION SWITCH
1.
When brake pedal is depressed while selector lever is in the P position (CVT models), or shift lever is in
the Neutral position (M/T models), BCM activates NATS antenna amp. that is located behind push-button
ignition switch.
2.
When Intelligent Key (transponder built-in) backside is contacted to push-button ignition switch, BCM
starts NATS ID verification between BCM and Intelligent Key (transponder built-in) via NATS antenna
amp.
3.
When NATS ID verification result is OK, buzzer in combination meter sounds.
4.
When push-button ignition switch is pressed, BCM transmits steering lock unit unlock request signal to
steering lock unit.
• Lock/unlock position signal
• Steering lock unit lock status signal
• Steering lock undefined position signal
Push-button ignition switch
Push-button ignition switch operation signal
Each door switch
Door open/close condition signal
Stop lamp switch
Brake pedal operation signal
CVT shift selector (detention switch) (CVT models)
P position signal
Transmission range switch (CVT models)
P/N position signal
Reverse/neutral position switch (M/T models)
Neutral position signal
Clutch interlock switch (M/T models)
Clutch interlock switch signal
Transmit unit
Signal name
Reception unit
Signal name
IPDM E/R
CAN communication
Ignition ON signal
Combination meter
Security indicator lamp signal
Steering lock unit
• Steering lock unit unlock request signal
• Steering lock unit lock request signal
• Steering lock code signal
• Ignition ON signal
SYSTEM
SEC-21
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
• Steering lock wrong code signal
5.
When BCM receives a steering lock unit unlock status signal from the steering lock unit, it stops the steer-
ing lock unit unlock request signal.
6.
When the ignition switch is turned to ON, BCM performs ID verification with the ECM. When the result is
OK, engine start is permitted.
7.
BCM detects that the selector lever position and brake pedal operation condition.
8.
When ECM detects that the start engine conditions* are satisfied, it transmits a starter control relay
request signal to BCM.
9.
When BCM receives a starter control relay request signal from ECM, the starter control relay is turned
ON.
10. When starter control relay is turned ON, IPDM E/R turns ON the starter relay and drives the starter motor.
11. When BCM receives an engine status signal from ECM, it turns the starter relay and starter control relay
OFF and stops cranking.
*: For the engine start condition, refer to “IGNITION SWITCH POSITION CHANGE TABLE BY PUSH-BUT-
TON IGNITION SWITCH OPERATION” below.
IGNITION SWITCH POSITION CHANGE TABLE BY PUSH-BUTTON IGNITION SWITCH OPERA-
TION
The ignition switch position can be changed by the following operations.
NOTE:
• When an Intelligent Key is within the detection area of inside key antenna or when Intelligent Key backside is
contacted to push-button ignition switch, it is equivalent to the operations below.
• When starting the engine, the BCM monitors under the engine start conditions,
CVT models
- Brake pedal operation condition
- Selector lever position
- Vehicle speed
M/T models
- Clutch pedal operation condition
- Vehicle speed
Vehicle speed: less than 4 km/h (2.5 MPH)
Vehicle speed: 4 km/h (2.5 MPH) or more
Emergency stop operation
Power supply posi-
tion
Condition
Push-button ignition
switch operation fre-
quency
CVT models
M/T models
Selector lever
Brake pedal oper-
ation condition
Shift lever position
Clutch pedal oper-
ation condition
LOCK
→
ON
—
Not depressed
—
Not depressed
1
LOCK
→
ON
→
OFF
—
Not depressed
—
Not depressed
2
LOCK
→
START
ON
→
START
P or N position
Depressed
—
Depressed
1
Engine is running
→
LOCK
—
—
—
—
1
Power supply posi-
tion
Condition
Push-button ignition
switch operation fre-
quency
CVT models
M/T models
Selector lever
Brake pedal oper-
ation condition
Shift lever position
Clutch pedal oper-
ation condition
Engine is running
→
OFF
—
—
—
—
Emergency stop oper-
ation
Engine stall return
operation while driv-
ing
N position
Not depressed
—
Depressed
1
SEC-22
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM
• Press and hold the push-button ignition switch for 2 seconds or more.
• Press the push-button ignition switch 3 times or more within 1.5 seconds.
VEHICLE SECURITY SYSTEM
VEHICLE SECURITY SYSTEM : System Description
INFOID:0000000010437576
SYSTEM DIAGRAM
BCM INPUT/OUTPUT SIGNAL CHART
Input Signal Item
Output Signal Item
JMKIB3226GB
Transmit unit
Signal name
IPDM E/R
CAN communication
Hood switch signal
Push-button ignition switch
Push switch signal
Each door switch
Door switch signal
Each door request switch
Door request switch signal
Siren control unit
Alarm link signal
Sensor cancel switch
Sensor cancel switch signal
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст