Nissan Qashqai J11. Manual — part 2024
MWI-32
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
SPECIAL FUNCTION
Special menu
W/L ON HISTORY
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: No warning/indicator lamp history is stored.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
PKB SW
[On/Off]
Displays [On/Off] condition of parking brake switch.
BUCKLE SW
[On/Off]
Displays [On/Off] condition of seat belt buckle switch LH.
PASS BUCKLE SW
[On/Off]
Displays [On/Off] condition of seat belt buckle switch RH.
BRAKE OIL SW
[On/Off]
Displays [On/Off] condition of brake fluid level switch.
DISTANCE
[Mi] or [km]
Displays distance to empty.
OUTSIDE TEMP
[
°
F or
°
C]
Displays the ambient air temperature which is input from the ambient sensor.
FUEL LOW SIG
[On/Off]
Displays [On/Off] condition of low-fuel warning signal.
STRG SW INPUT
[SW 1-SW 10, NOT INPUT]
Displays [SW 1-SW 10, NOT INPUT] condition of steering switches.
BUZZER
[On/Off]
X
Buzzer status (in the combination meter) is detected from the buzzer output signal
received from each unit via CAN communication and the warning output condition
of the combination meter.
BSW IND
[On/Off]
Displays [On/Off] condition of blind spot warning indicator.
BSW W/L
[On/Off]
Displays [On/Off] condition of blind spot warning message in the information dis-
play.
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
W/L ON HISTORY
Lighting history of warning lamp and indicator lamp can be checked.
MWI
COMBINATION METER
MWI-33
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000010329961
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Condition
Value/Status
SPEED METER
[km/h]
Ignition switch
ON
While driving
Input value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
SPEED OUTPUT
[km/h]
Ignition switch
ON
While driving
Output value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
ODO OUTPUT
Ignition switch
ON
—
Output value of odometer signal (CAN
communication signal)
TACHO METER
[rpm]
Ignition switch
ON
While driving
Input value of engine speed signal
(CAN communication signal)
NOTE:
8191.875 is displayed when the mal-
function signal is received
FUEL METER
[lit]
Ignition switch
ON
—
Input value of fuel level sensor signal
W TEMP METER
[
°
C]
Ignition switch
ON
—
Input value of engine coolant tempera-
ture signal (CAN communication sig-
nal)
NOTE:
215 is displayed when the malfunction
signal is input
ABS W/L
Ignition switch
ON
ABS warning lamp ON
On
ABS warning lamp OFF
Off
VDC/TCS IND
Ignition switch
ON
VDC OFF indicator lamp ON
On
VDC OFF indicator lamp OFF
Off
SLIP IND
Ignition switch
ON
VDC warning lamp ON
On
VDC warning lamp OFF
Off
BRAKE W/L
Ignition switch
ON
Brake warning lamp ON
On
Brake warning lamp OFF
Off
DOOR W/L
Ignition switch
ON
During door open warning indication
On
Other than the above
Off
TRUNK/GLAS-H
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
HI-BEAM IND
Ignition switch
ON
High beam indicator lamp ON
On
High beam indicator lamp OFF
Off
TURN IND
Ignition switch
ON
Turn signal indicator lamp ON
On
Turn signal indicator lamp OFF
Off
FR FOG IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
MWI-34
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
RR FOG IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
LIGHT IND
Ignition switch
ON
Position lamp indicator lamp ON
On
Position lamp indicator lamp OFF
Off
OIL W/L
Ignition switch
ON
engine oil pressure warning lamp ON
On
engine oil pressure warning lamp OFF
Off
MIL
Ignition switch
ON
Malfunction indicator (Yellow) ON
On
Malfunction indicator (Yellow) OFF
Off
GLOW IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
C-ENG2 W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
CRUISE IND
Ignition switch
ON
Cruise indicator ON
On
Cruise indicator OFF
Off
SET IND
Ignition switch
ON
SET indicator ON
On
SET indicator OFF
Off
O/D OFF IND
Ignition switch
ON
OD OFF indicator lamp ON
On
OD OFF indicator lamp OFF
Off
ATC/T-AMT W/L
Ignition switch
ON
A/T CHECK indicator lamp ON
On
A/T CHECK indicator lamp OFF
Off
ATF TEMP W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
CVT IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
4WD W/L
Ignition switch
ON
AWD warning lamp ON
On
AWD warning lamp OFF
Off
4WD LOCK IND
Ignition switch
ON
AWD LOCK indicator lamp ON
On
AWD LOCK indicator lamp OFF
Off
FUEL W/L
Ignition switch
ON
During low fuel warning indication
On
Other than the above
Off
AIR PRES W/L
Ignition switch
ON
Low tire pressure warning lamp ON
On
Other than the above
Off
KEY G/Y W/L
Ignition switch
ON
Intelligent Key system malfunction ON
On
Intelligent Key system malfunction OFF
Off
KEY R W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
KEY KNOB W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
EPS W/L
Ignition switch
ON
EPS warning lamp ON
On
EPS warning lamp OFF
Off
Monitor Item
Condition
Value/Status
MWI
COMBINATION METER
MWI-35
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DPF W/L
Engine running
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
TRAILER IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
SHIFT IND
Ignition switch
ON
During the indication of “P” by shift position
indicator
P
During the indication of “R” by shift position
indicator
R
During the indication of “N” by shift position
indicator
N
During the indication of “D” by shift position
indicator
D
During the indication of “L” by shift position
indicator
L
During the indication of “M1” by shift posi-
tion indicator
M1
During the indication of “M2” by shift posi-
tion indicator
M2
During the indication of “M3” by shift posi-
tion indicator
M3
During the indication of “M4” by shift posi-
tion indicator
M4
During the indication of “M5” by shift posi-
tion indicator
M5
During the indication of “M6” by shift posi-
tion indicator
M6
M RANGE SW
Ignition switch
ON
Selector lever in manual mode position
On
Other than the above
Off
NM RANGE SW
Ignition switch
ON
Selector lever in manual mode position
Off
Other than the above
On
AT SFT UP SW
Ignition switch
ON
Selector lever in + position
On
Other than the above
Off
AT SFT DWN SW
Ignition switch
ON
Selector lever in – position
On
Other than the above
Off
A/C LOW TEMP
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
COMP F/B SIG
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
PKB SW
Ignition switch
ON
Parking brake switch ON
On
Parking brake switch OFF
Off
BUCKLE SW
Ignition switch
ON
Driver seat belt not fastened
On
Driver seat belt fastened
Off
BRAKE OIL SW
Ignition switch
ON
Brake fluid level switch ON
On
Brake fluid level switch OFF
Off
AMB POWER
Ignition switch
ON
Other than the following
On
Receives A/C auto amp. connection recog-
nition signal
Off
Monitor Item
Condition
Value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст