Nissan Qashqai J11. Manual — part 2176
DAS-118
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
U0155 METER CAN 1
U0155 METER CAN 1
DTC Logic
INFOID:0000000010765915
DTC DETECTION LOGIC
NOTE:
If DTC U0155 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
126, "FRONT CAMERA UNIT : DTC Logic"
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM SELF DIAGNOSTIC RESULT
1.
Start the engine.
2.
Perform “Self Diagnostic Result” of “LANE CAMERA” using CONSULT.
Is DTC detected?
YES
>> Refer to
DAS-118, "Diagnosis Procedure"
NO
>> Refer to
GI-41, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000010765916
1.
CHECK COMBINATION METAER SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “METER/M&A” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> Replace the front camera unit. Refer to
DAS-201, "Removal and Installation"
.
CONSULT Display
DTC Detection Condition
Possible Cause
METER CAN CIRC 1
[U0155]
Front camera unit receives an error signal from
combination meter via CAN communication.
• Combination meter
• Front camera unit
DAS
U0235 DIST SEN CAN CIRC 1
DAS-119
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0235 DIST SEN CAN CIRC 1
DTC Logic
INFOID:0000000010765902
DTC DETECTION LOGIC
NOTE:
If DTC U0235 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
126, "FRONT CAMERA UNIT : DTC Logic"
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM SELF DIAGNOSTIC RESULT
1.
Start the engine.
2.
Perform “Self Diagnostic Result” of “LANE CAMERA” using CONSULT.
Is DTC detected?
YES
>> Refer to
DAS-119, "Diagnosis Procedure"
NO
>> Refer to
GI-41, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000010765903
1.
CHECK DISTANCE SENSOR SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> Replace the front camera unit. Refer to
DAS-201, "Removal and Installation"
.
CONSULT Display
DTC Detection Condition
Possible Cause
DIST SEN CAN CIRC 1
[U0235]
If front camera unit detects an error signal that is
received from distance sensor via CAN commu-
nication
• Distance sensor
• Front camera unit
DAS-120
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
U0401 ECM CAN 1
U0401 ECM CAN 1
DTC Logic
INFOID:0000000010416852
DTC DETECTION LOGIC
NOTE:
If DTC U0401 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
126, "DISTANCE SENSOR : DTC Logic"
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM SELF DIAGNOSTIC RESULT
1.
Start the engine.
2.
Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Is DTC detected?
YES
>> Refer to
DAS-120, "Diagnosis Procedure"
NO
>> Refer to
GI-41, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000010416853
1.
CHECK ECM SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “ENGINE” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
(K9K) or
(R9M).
NO
>> Replace the distance sensor. Refer to
DAS-203, "Removal and Installation"
CONSULT Display
DTC Detection Condition
Possible Cause
ECM CAN CIR 1
[U0401]
Distance sensor receives an error signal from
ECM via CAN communication.
• ECM.
• Distance sensor.
DAS
U0415 VDC CAN 1
DAS-121
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0415 VDC CAN 1
DTC Logic
INFOID:0000000010416854
DTC DETECTION LOGIC
NOTE:
If DTC U0415 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
126, "DISTANCE SENSOR : DTC Logic"
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM SELF DIAGNOSTIC RESULT
1.
Start the engine.
2.
Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Is DTC detected?
YES
>> Refer to
DAS-121, "Diagnosis Procedure"
NO
>> Refer to
GI-41, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000010416855
1.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “ABS” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> Replace the distance sensor. Refer to
DAS-203, "Removal and Installation"
.
CONSULT Display
DTC Detection Condition
Possible Cause
VDC CAN CIR 1
[U0415]
Distance sensor receives an error signal from
ABS actuator and electric unit (control unit) via
CAN communication.
• ABS actuator and electric unit (control unit).
• Distance sensor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст