Nissan Qashqai J11. Manual — part 1236
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-213
< SYSTEM DESCRIPTION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR OPEN FUNCTION : System Diagram
INFOID:0000000010683587
BACK DOOR OPEN FUNCTION : System Description
INFOID:0000000010683588
BACK DOOR OPEN FUNCTION
• When the BCM detects that back door opener switch is pressed, it activates the outside key antenna (rear
bumper) and inside key antenna and transmits the request signal to the Intelligent Key. And then, check that
the Intelligent Key is near the back door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• If the verification result is OK, BCM opens back door.
OPERATION CONDITION
If the following conditions are satisfied, the back door can be opened.
*
: Even with a registered Intelligent Key remaining inside the vehicle, back door can be opened from outside of
the vehicle with a spare Intelligent Key as long as key IDs are different.
OUTSIDE KEY ANTENNA DETECTION AREA
The outside key antenna detection area of back door open function
is in the range of approximately 80 cm (31.50 in) surrounding back
door opener switch
. However, this operating range depends on
the ambient conditions.
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
JMKIB3635GB
Back door opener switch operation
Operation condition
Open
• All door: locked and closed
• Ignition switch: OFF
• Intelligent Key is within outside key antenna (rear bumper) detection area
*
JMKIA1955ZZ
DLK-214
< SYSTEM DESCRIPTION >
[TYPE 2]
SYSTEM (INTELLIGENT KEY SYSTEM)
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
INFOID:0000000010434767
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000010434768
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the remote controller by operating the door lock/unlock button.
OPERATION
Remote keyless entry system controls operation of the following items.
• Door lock/unlock
• Anti-hijack function
• Hazard reminder function
• Auto door lock
• Door lock status indicator operation
OPERATION AREA
To check that the Intelligent Key works normally, use within 1 m (3 ft) range of each doors, however the opera-
ble range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal transmitted from
Intelligent Key to BCM via remote keyless entry receiver.
• BCM receives the signal and compares it with the registered key ID to the vehicle.
• BCM transmits door lock/unlock signal to each door lock actuator and operates each door lock actuator,
when key ID matches. At the same time, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times).
OPERATION CONDITION
If the following condition are satisfied, remote keyless entry operation is performed when the Intelligent Key is
operated.
Function
In
te
llige
n
t Key
Re
mo
te
ke
yl
es
s en
try rec
e
iv
e
r
Ba
ck
do
or op
en
e
r a
c
tu
a
tor
Ba
ck
do
or swi
tch
In
si
de
ke
y an
ten
n
a
Ou
ts
ide
k
e
y
an
te
nn
a (re
ar
bum
p
e
r)
BC
M
Ba
ck
do
or op
en
e
r s
w
it
c
h
Back open function (back door opener switch)
×
×
×
×
×
×
×
×
JMKIB3318GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-215
< SYSTEM DESCRIPTION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
ANTI-HIJACK FUNCTION
• When an LOCK signal is transmitted from Intelligent Key, all doors are locked.
• When an UNLOCK signal is transmitted from Intelligent Key once, driver side door is unlocked.
• Then, if an UNLOCK signal is transmitted from Intelligent Key again within 5 seconds, all other doors (except
for back door) are unlocked.
AUTO DOOR LOCK FUNCTION
After door is unlocked by Intelligent Key button operation and if 30 seconds or more passes without performing
the following operation, all doors are locked. However, operation check function does not activate.
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
224, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (Type 2)"
.
DOOR LOCK STATUS INDICATOR OPERATION
• Door lock status indicator turns indicator lamp ON or OFF and indicates door lock or unlock state.
• For door lock status indicator operation, refer to
.
HAZARD REMINDER FUNCTION
Operation Description
When doors are locked or unlocked by Intelligent Key button operation, BCM blinks hazard warning lamps as
a reminder.
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
KEY REMINDER FUNCTION
Remote controller operation
Operation condition
Lock
• All doors closed
• Ignition switch in the OFF position
• P position warning is not activated
Unlock
• Ignition switch is in the OFF position
• Intelligent Key is outside the vehicle
• P position warning is not activated
Operating condition
• Door switch is ON (door is open)
• Door is locked
• Push switch is pressed
Door lock operation
(With Intelligent Key button)
Hazard warning lamp blink
Lock
Once
Unlock (all door unlock)
Twice
Unlock (anti-hijack operation)
Twice (quick)
Remote keyless entry functions
In
te
llige
n
t Key
Do
or swit
ch
Do
or loc
k
ac
tu
ato
r
P
u
s
h
-b
utt
o
n
ig
nit
ion
s
w
itc
h
CAN co
mm
un
ic
ati
o
n
s
y
s
tem
BC
M
Combination meter
Hazard warning
lamp
Door lock/unlock function by remote control button
×
×
×
×
×
Hazard reminder function
×
×
×
×
×
×
Anti-hijack function
×
×
×
×
×
×
Auto door lock function
×
×
×
DLK-216
< SYSTEM DESCRIPTION >
[TYPE 2]
SYSTEM (INTELLIGENT KEY SYSTEM)
KEY REMINDER FUNCTION : System Diagram
INFOID:0000000010434769
KEY REMINDER FUNCTION : System Description
INFOID:0000000010434770
Key reminder is the function that prevents the key from being left in the vehicle.
Key reminder has the following 3 functions.
*:If the door closing impact shocks the door lock knob, or contacts against baggage with the door lock knob might activate the door locks
accidentally but unlock operation is perform in these cases.
CAUTION:
• The above function operates when the Intelligent Key is inside the vehicle. However, there may be
times when the Intelligent Key cannot be detected, and this function does not operate when the Intel-
ligent Key is on the instrument panel, rear parcel shelf, or in the glove box. Also, this system some-
times does not operate if the Intelligent Key is in the door pocket for the open door.
WARNING FUNCTION
WARNING FUNCTION : System Description
INFOID:0000000010434771
OPERATION DESCRIPTION
The warning function are as per the following items and are given to the user as warning information and
warnings using combinations of Intelligent Key warning buzzer, combination meter buzzer and information dis-
play in combination meter.
• Intelligent Key system malfunction
• OFF position warning
• P position warning
• Take away warning
• Door lock operation warning
• Engine start information
JMKIB3319GB
Key remainder func-
tion
Operation condition
Operation
Driver side door
opened
Right after door is locked by door lock/unlock switch or driver door lock
knob operation under the following conditions
• Ignition switch is in the OFF position
• Intelligent Key is inside the vehicle
• Driver side door is opened
All doors unlock
Driver side door
closed*
Right after driver side door is closed under the following conditions
• Intelligent Key is inside the vehicle
• Driver side door is opened
• Driver side door is in unlock state
All doors unlock
Door is open or closed
Right after all doors are closed under the following conditions
• Intelligent Key is inside the vehicle
• Any door is opened
• All doors are locked.
• All doors unlock
• Honk Intelligent Key warn-
ing buzzer
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст