Nissan Qashqai J11. Manual — part 630
TRANSAXLE ASSEMBLY
TM-95
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F95R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
FINAL DRIVE
1.
Assembled gear change lever
2.
Rolled ring
3.
Rolled ring
4.
Ball bearing
5.
First - second gear shift fork
6.
Ball bearing
7.
Fork shaft ring
8.
Third - fourth gear shift fork
9.
Fork shaft ring
10. Fork shaft ring
11. Fifth - sixth gear shift fork
12. Fork shaft ring
13. Neutral return shaft
14. Gear selection return spring
15. Gear selection guide finger
16. Fitted internal selector shaft
17. Selector seal
Refer to
for symbols not described on the above.
E1DIA0247ZZ
TM-96
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F95R]
TRANSAXLE ASSEMBLY
Disassembly
INFOID:0000000010428785
1.
Remove drain plug and gasket from clutch housing using the socket [Commercial service tool] and then
drain gear oil.
2.
Remove filler plug and gasket from transaxle case.
3.
Remove:
• the clutch thrust bearing bolts (1),
• the hydraulic clutch thrust bearing (2).
4.
Remove:
1.
Bearing
2.
Differential ring gear
3.
Differential unit
4.
Ring gear bolt
5.
Bearing
6.
Adjustment washer
Refer to
for symbols not described on the above.
E1DIA0249GB
E1DIA0254ZZ
TRANSAXLE ASSEMBLY
TM-97
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F95R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
• the blanking cover (1)
• the selector lever pin (2),
• the gear lever (3),
• the dual function switch (4) .
5.
Remove:
• the bolt (1) from the lifting eye,
• the lifting eye,
• the gear shift cable sheath stop bolts (2) ,
• the gear shift cable sheath stop,
• the selector cable sheath stop bolts (3) ,
• the selector cable sheath stop,
• the mechanism housing bolts.
6.
Separate the retaining stop ring (1) of the output shaft.
7.
Remove the mechanism housing with the gear lever (1) turned.
8.
Remove:
E1DIA0255ZZ
E1DIA0256ZZ
E1DIA0257ZZ
E1DIA0258ZZ
TM-98
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F95R]
TRANSAXLE ASSEMBLY
• the oil neck (1) ,
• the oil neck (2) .
9.
Remove:
• the stop ring (1) ,
• the output shaft adjusting shim,
• the differential output seal, refer to
,
10. Remove the seal of the selector lever (1) using a screwdriver.
CAUTION:
Never damage mechanism housing.
11. Remove:
• the pin (1),
• the gear lever (2).
E1DIA0259ZZ
E1DIA0260ZZ
E1DIA0261ZZ
E1DIA0309ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст