Nissan Qashqai J11. Manual — part 1719
HIGH-MOUNTED STOP LAMP
EXL-177
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000010338878
Removal and Installation
INFOID:0000000010338879
CAUTION:
Disconnect battery negative terminal or remove power circuit fuse when performing the operation for
preventing electric leakage. Refer to
EXL-8, "Precautions for Removing Battery Terminal"
REMOVAL
1.
Remove rear spoiler. Refer to
EXT-46, "Removal and Installation"
.
2.
Disengage high-mounted stop lamp fixing metal clips using a remover tool (A), and then remove high-
mounted stop lamp unit.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010338880
CAUTION:
Replacement of a single part is not possible due to the adoption of LED bulb. For replacement, replace
high-mounted stop lamp unit as a set.
Rear spoiler
High-mounted stop lamp unit
: Metal clip
JMLIA5102ZZ
: Metal clip
JMLIA5136ZZ
EXL-178
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000010338881
Removal and Installation
INFOID:0000000010338882
CAUTION:
Disconnect battery negative terminal or remove power circuit fuse when performing the operation for
preventing electric leakage. Refer to
EXL-8, "Precautions for Removing Battery Terminal"
REMOVAL
1.
Remove back door finisher. Refer to
EXT-45, "Removal and Installation"
2.
Disconnect license plate lamp harness connector.
3.
Disengage license plate lamp housing fixing pawl, and then remove license plate lamp housing.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010338883
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
EXL-8, "Precautions for Removing Battery Terminal"
.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned OFF.
Back door panel
Back door finisher
License plate lamp housing
License plate lamp bulb
License plate lamp bulb socket
: Pawl
JMLIA5101ZZ
LICENSE PLATE LAMP
EXL-179
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1.
Remove back door finisher. Refer to
EXT-45, "Removal and Installation"
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the socket.
EXL-180
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
REAR REFLEX REFLECTOR
REAR REFLEX REFLECTOR
Exploded View
INFOID:0000000010338884
Removal and Installation
INFOID:0000000010338885
REMOVAL
1.
Remove rear bumper fascia. Refer to
EXT-23, "Removal and Installation"
2.
Remove rear reflex reflector mounting bolt and pawls, and then remove rear reflex reflector.
INSTALLATION
Install in the reverse order of removal.
Rear reflex reflector
Rear bumper fascia assembly
: Pawl
JMLIA5103ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст