Nissan Qashqai J11. Manual — part 1538
EXT-26
< REMOVAL AND INSTALLATION >
FRONT GRILLE
3.
Slowly pull front grille upper side, and using a flat screwdriver,
depress clip barb to remove clips (1) (LH/RH) from headlamp
(2).
4.
Release front grille lower pawls from front bumper.
CAUTION:
To remove front grille assembly, slowly release lower pawls to avoid damaging pawls.
5.
Disconnect front camera harness (if equipped).
6.
Remove front grille assembly.
7.
Press barbs to release RH fixing clip (A) and then turn to remove
it from front grille (1) as shown.
For LH fixing clip, turn in opposite side to remove it from front
grille (1).
8.
Remove the following parts after removing front grille.
CAUTION:
To remove parts from front grille assembly, slowly release pawls to avoid damaging pawls.
• Front grille molding
• Front emblem
• Front camera (if equipped)
INSTALLATION
Install in the reverse order of removal.
E1KIA0018ZZ
E1KIA0075ZZ
ACTIVE GRILLE SHUTTER
EXT-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
ACTIVE GRILLE SHUTTER
Exploded View
INFOID:0000000010784574
1.
Front bumper fascia side bracket
(RH)
2.
Front bumper reinforcement
3.
Active grille shutter
4.
Front energy absorber
5.
Front fascia side deflector
(RH)
6.
Front fog lamp (RH) (if equipped)
7.
Tow cover
8.
Front license plate bracket
9.
Front bumper fascia
10.
Front fog lamp (LH) (if equipped) 11.
Front bumper finisher
(if equipped)
12.
Front fascia side deflector (LH)
13.
Front air spoiler
14.
Front under cover
15.
Front bumper fascia side bracket
(LH)
16.
Front bumper reinforcement
bracket (RH)
17.
Front bumper reinforcement
bracket (LH)
A.
J nut
B.
Front fog lamp bracket
Pawl
AWKIA2516ZZ
EXT-28
< REMOVAL AND INSTALLATION >
ACTIVE GRILLE SHUTTER
Removal and Installation
INFOID:0000000010784575
REMOVAL
1.
Remove the front bumper fascia. Refer to
EXT-19, "Removal and Installation"
.
2.
Remove the radiator core support upper.
3.
Reposition the radiator and condenser as necessary to access active grille shutter bolts.
4.
Remove the active grille shutter bolts.
5.
Release active grille shutter harness clips using a suitable tool.
6.
Disconnect the harness connector (A) from the active grille shut-
ter (1).
7.
Remove the active grille shutter nut (B) (LH/RH).
INSTALLATION
Installation is in the reverse order of removal.
ALKIA3150ZZ
COWL TOP
EXT-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
COWL TOP
Exploded View
INFOID:0000000010377909
Removal and Installation
INFOID:0000000010377910
REMOVAL
1.
Fully open hood assembly.
2.
Remove front wiper arm (LH/RH) from vehicle. Refer to
3.
Remove vehicle identification covers (LH/RH).
4.
Remove windscreen washer nozzle (LH/RH).
• Pull nozzle upwards (A)
• Disconnect washer nozzle tube.
CAUTION:
Fit cap on washer nozzle tube to avoid spills and contami-
nation.
1.
Cowl top assembly
2.
Cowl top cover grille
3.
Cowl top cover
4.
Cowl top seal (if equipped)
5.
Front fender cover
6.
Cowl top foam insulator
7.
Upper dash assembly
8.
Double-adhesive tape
Clip
E1KIA0132ZZ
E1KIA0019ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст