Nissan Maxima. Manual — part 203
AV-632
< WIRING DIAGRAM >
[COLOR DISPLAY - W/BOSE & NAVI]
COLOR DISPLAY
ABNIA5124GB
AV
COLOR DISPLAY
AV-633
< WIRING DIAGRAM >
[COLOR DISPLAY - W/BOSE & NAVI]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA5125GB
AV-634
< WIRING DIAGRAM >
[COLOR DISPLAY - W/BOSE & NAVI]
COLOR DISPLAY
ABNIA1663GB
AV
MULTI AV SYSTEM SYMPTOMS
AV-635
< SYMPTOM DIAGNOSIS >
[COLOR DISPLAY - W/BOSE & NAVI]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYMPTOM DIAGNOSIS
MULTI AV SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000009471523
RELATED TO NAVIGATION
Trouble Diagnosis Chart by Symptom
RELATED TO HANDS-FREE PHONE
• Before performing diagnosis, confirm that the cellular phone being used by the customer is compatible with
the vehicle.
• It is possible that a malfunction is occurring due to a version change of the phone even though the phone is
a compatible type. This can be confirmed by changing the cellular phone to another compatible type, and
checking that it operates normally. It is important to determine whether the cause of the malfunction is the
vehicle or the cellular phone.
Check Compatibility
1. Make sure the customer’s Bluetooth
®
related concern is understood.
2. Verify the customer’s concern.
NOTE:
The customer’s phone may be required, depending upon their concern.
3. Write down the customer’s phone brand, model, and service provider.
NOTE:
It is necessary to know the service provider. On occasion, a given phone may be on the approved list with one
provider, but may not be on the approved list with other providers.
4. Go to "www.nissanusa.com/bluetooth/".
a. Using the website’s search engine, find out if the customer’s phone is on the approved list.
b. If the customer’s phone is NOT on the approved list:
Stop diagnosis here. the customer need to obtain a Bluetooth phone that is on the approved list before
any further action.
c. If the feature related to the customer’s concern shows as "N" (not compatible):
Symptoms
Check items
Probable malfunction location
Multifunction switch and preset
switch operation does not work.
• All switches cannot be operated.
• “MULTI AV” is displayed on system
selection screen when the CONSULT
is started.
• Multifunction switch power supply and ground circuit.
Refer to
.
• AV communication circuit between AV control unit and
multifunction switch.
Perform CONSULT self-diagnosis. Refer to
• All switches cannot be operated.
• “MULTI AV” is not displayed on sys-
tem selection screen when the CON-
SULT is initialized.
AV control unit power supply and ground circuit malfunc-
tion. Refer to
AV-571, "AV CONTROL UNIT : Diagnosis
.
Only specified switch cannot be operat-
ed.
Multifunction switch or preset switch malfunction.
Perform multifunction switch and preset switch self-di-
agnosis function.
Refer to
Fuel economy display is abnor-
mal.
There is malfunction in the CONSULT
self-diagnosis result.
Perform detected DTC self-diagnosis.
Refer to
AV-536, "CONSULT Function (MULTI AV)"
.
There is no malfunction in the self-diag-
nosis results.
Ignition signal circuit malfunction.
Refer to
.
Start of the AV control unit takes
time.
—
Room lamp timer control circuit malfunction.
Guide sound is not heard or too
low.
On the setting display select “system
sound (guide sound volume, etc.),” and
confirm that guide sound is ON.
Voice guidance signal circuit malfunction.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст