Nissan Maxima. Manual — part 1185
DUCTS AND GRILLES
VTL-9
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
REMOVAL AND INSTALLATION
DUCTS AND GRILLES
Exploded View
INFOID:0000000009466243
Ducts
AWIIA1526ZZ
1.
Side defroster nozzle (RH)
2.
Front defroster nozzle
3.
Side defroster nozzle (LH)
4.
Upper ventilator duct
5.
Heater and cooling unit assembly
6.
Connector duct (LH)
7.
Floor ventilator duct (LH)
8.
Rear floor duct (LH)
9.
Connector duct (center)
10. Rear ventilator duct (center)
11. Rear floor duct (RH)
12. Floor ventilator duct (RH)
13. Connector duct (RH)
Front
VTL-10
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
Grilles
FRONT DEFROSTER NOZZLE
FRONT DEFROSTER NOZZLE : Removal and Installation
INFOID:0000000009466244
REMOVAL
CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery terminals and wait at least three
minutes.
1. Disconnect the battery negative and positive terminals. Refer to
PG-67, "Removal and Installation (Bat-
AWIIA1527ZZ
1.
Front defroster grille (RH)
2.
Front defroster grille (LH)
3.
Side defroster grille (LH)
4.
Side ventilator grille (LH)
5.
Center ventilator grille (LH)
6.
Center ventilator grille (RH)
7.
Center ventilator grille finisher (LH)
8.
Cluster lid D support
9.
Center ventilator grille finisher (RH)
10. Cluster lid D
11. Side ventilator grille (RH)
12. Side defroster grille (RH)
13. Instrument panel
14. Rear ventilator grille (part of rear
console finisher)
DUCTS AND GRILLES
VTL-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
2. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
3. Remove the front defroster nozzle.
INSTALLATION
Installation is in the reverse order of removal.
UPPER VENTILATOR DUCT
UPPER VENTILATOR DUCT : Removal and Installation
INFOID:0000000009466245
REMOVAL
CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery terminals and wait at least three
minutes.
1. Disconnect the battery negative and positive terminals. Refer to
PG-67, "Removal and Installation (Bat-
2. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
3. Remove the upper ventilator duct.
INSTALLATION
Installation is in the reverse order of removal.
SIDE DEFROSTER NOZZLE
SIDE DEFROSTER NOZZLE : Removal and Installation
INFOID:0000000009466246
REMOVAL
CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery terminals and wait at least three
minutes.
1. Disconnect the battery negative and positive terminals. Refer to
PG-67, "Removal and Installation (Bat-
2. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
3. Remove the front defroster nozzle.
4. Remove the side defroster nozzle (LH/RH).
INSTALLATION
Installation is in the reverse order of removal.
REAR FLOOR DUCTS
REAR FLOOR DUCTS : Removal and Installation
INFOID:0000000009466247
REAR FLOOR DUCT (LH/RH)
Removal
1. Remove the rear ventilator duct (center). Refer to
VTL-12, "REAR VENTILATOR DUCTS : Removal and
.
2. Remove the rear floor duct (LH/RH) clips.
3. Remove the rear floor ducts (LH/RH).
Installation
Installation is in the reverse order of removal.
FLOOR VENTILATOR DUCT (LH/RH)
Removal
1. Remove the connector duct. Refer to
VTL-11, "REAR FLOOR DUCTS : Removal and Installation"
.
2. Remove the rear ventilator duct (LH/RH) clips.
3. Remove the rear ventilator ducts (LH/RH).
Installation
VTL-12
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
Installation is in the reverse order of removal.
CONNECTOR DUCT
Removal
1. Remove the center console. Refer to
IP-14, "Removal and Installation"
.
2. Remove the connector duct (LH/RH).
Installation
Installation is in the reverse order of removal.
REAR VENTILATOR DUCTS
REAR VENTILATOR DUCTS : Removal and Installation
INFOID:0000000009466248
CONNECTOR DUCT (CENTER)
Removal
1. Remove the center console. Refer to
IP-14, "Removal and Installation"
.
2. Remove the rear ventilator duct (center).
3. Remove the connector duct (center).
Installation
Installation is in the reverse order of removal.
REAR VENTILATOR DUCT (CENTER)
Removal
1. Remove the center console. Refer to
IP-14, "Removal and Installation"
.
2. Remove the rear ventilator duct (center).
Installation
Installation is in the reverse order of removal.
FRONT DEFROSTER GRILLE
FRONT DEFROSTER GRILLE : Removal and Installation
INFOID:0000000009466249
REMOVAL
Remove the front defroster grille from the instrument panel.
CAUTION:
Use a suitable tool to remove the grille to avoid damage to the instrument panel.
INSTALLATION
Installation is in the reverse order of removal.
CENTER VENTILATOR GRILLES
CENTER VENTILATOR GRILLES : Removal and Installation
INFOID:0000000009466250
REMOVAL
1. Remove cluster lid D. Refer to
IP-18, "Removal and Installation"
2. Remove the A/C switch assembly or the multifunction switch from cluster lid D.
3. Remove the cluster lid D support.
4. Remove the center ventilator grilles with finisher.
5. Remove the center ventilator grille from the finisher.
INSTALLATION
Installation is in the reverse order of removal.
SIDE VENTILATOR GRILLES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст