Nissan Maxima. Manual — part 1186
DUCTS AND GRILLES
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
SIDE VENTILATOR GRILLES : Removal and Installation
INFOID:0000000009466251
NOTE:
This procedure should only be used if the side ventilator grille is going to be reused for installation and not
replaced with a new one.
REMOVAL
1. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
2. Remove the upper ventilator duct from the instrument panel.
3. Release the clips (A) with a suitable tool and push the side ven-
tilator grille out the front of the instrument panel.
CAUTION:
Use care to remove the side ventilator grille so as not to
damage the instrument panel.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Use care when inserting the side ventilator grille so as not to damage the instrument panel.
SIDE VENTILATOR GRILLES : Replacement
INFOID:0000000009466252
SIDE VENTILATOR GRILLE (RH)
CAUTION:
This procedure should only be used when replacing the side ventilator grille (RH) with a new one, as
the side ventilator grille will be damaged during removal and cannot be reused.
Removal
1. Remove the glove box assembly. Refer to
IP-20, "Removal and Installation"
2. Depress the LH and RH bottom clips (A) and the LH upper clip
(B) with suitable tools.
CAUTION:
Use care when inserting the suitable tool so as not to dam-
age the instrument panel.
3. Grip the front of the side ventilator grille with a suitable tool to
pull from the front and use your hand to push from behind to
remove the side ventilator grille from the instrument panel. Dis-
card the side ventilator grille.
CAUTION:
• The RH upper clip (C) will bend when the side ventilator
grille is removed.
• Use care when removing the side ventilator grille so as
not to damage the instrument panel.
• The side ventilator grille cannot be reused.
Installation
ALFIA0165ZZ
ALFIA0163ZZ
VTL-14
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
CAUTION:
Use care when inserting the new side ventilator grille so as not to damage the instrument panel.
1. Insert the new side ventilator grille into the front of the instrument panel. Push the new side ventilator grille
in evenly so it does not get cocked to one side.
2. Push the new side ventilator grille in until it is flush with the opening in the front of the instrument panel.
Make sure the side ventilator grille is correctly seated into the upper ventilator duct when fully inserted into
the opening in the front of the instrument panel.
SIDE VENTILATOR GRILLE (LH)
CAUTION:
This procedure should only be used when replacing the side ventilator grille (LH), as the side ventila-
tor grille will be damaged during removal and cannot be reused.
Removal
1. Remove the instrument lower panel LH. Refer to
IP-19, "Removal and Installation"
.
2. Depress the LH and RH bottom clips (A) and the RH upper clip
(B) with suitable tools.
CAUTION:
Use care when inserting the suitable tool so as not to dam-
age the instrument panel.
3. Grip the front of the side ventilator grille with a suitable tool to
pull from the front and use your hand to push from behind to
remove the side ventilator grille from the instrument panel. Dis-
card the side ventilator grille.
CAUTION:
• The LH upper clip (C) will bend when the side ventilator
grille is removed.
• Use care when removing the side ventilator grille so as
not to damage the instrument panel.
• The side ventilator grille cannot be reused.
Installation
CAUTION:
Use care when inserting the new side ventilator grille so as not to damage the instrument panel.
1. Insert the new side ventilator grille into the front of the instrument panel. Push the new side ventilator grille
in evenly so it does not get cocked to one side.
2. Push the new side ventilator grille in until it is flush with the opening in the front of the instrument panel.
Make sure the side ventilator grille is correctly seated into the upper ventilator duct when fully inserted into
the opening in the front of the instrument panel.
SIDE DEFROSTER GRILLES
SIDE DEFROSTER GRILLES : Removal and Installation
INFOID:0000000009466253
REMOVAL
Remove side defroster grilles from the instrument panel using a suitable tool.
CAUTION:
Use a suitable tool to remove the grille to avoid damage to the instrument panel.
INSTALLATION
Installation is in the reverse order of removal.
REAR VENTILATOR GRILLE
ALFIA0164ZZ
DUCTS AND GRILLES
VTL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
REAR VENTILATOR GRILLE : Removal and Installation
INFOID:0000000009466254
REMOVAL
Remove console rear finisher. Refer to
.
NOTE:
The rear ventilator grille is part of the console rear finisher.
INSTALLATION
Installation is in the reverse order of removal.
VTL-16
< REMOVAL AND INSTALLATION >
BLOWER UNIT
BLOWER UNIT
BLOWER UNIT
BLOWER UNIT : Removal and Installation
INFOID:0000000009466255
COMPONENTS
REMOVAL
1. Remove the heater and cooling unit assembly. Refer to
HA-47, "HEATER & COOLING UNIT ASSEMBLY
.
2. Disconnect the harness connector from blower motor.
3. Remove the blower unit screws and the blower unit.
INSTALLATION
Installation is in the reverse order of removal.
BLOWER MOTOR
BLOWER MOTOR : Removal and Installation
INFOID:0000000009466256
REMOVAL
1. Remove the glove box assembly. Refer to
IP-20, "Removal and Installation"
1.
Heater and cooling unit
2.
Blower unit
Front
ALIIA0013ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст