Nissan Maxima. Manual — part 764
DIAGNOSIS SYSTEM (BCM)
INL-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ACTIVE TEST
WORK SUPPORT
RKE-MODE CHG [On/Off]
Indicates condition of mode change signal from Intelligent Key.
RKE OPE COUN1 [0-19]
×
When remote keyless entry receiver receives the signal transmitted while oper-
ating on Intelligent Key, the numerical value start changing.
RKE OPE COUN2 [0-19]
×
When remote keyless entry receiver receives the signal transmitted while oper-
ating on Intelligent Key, the numerical value start changing.
REVERSE SW [On/Off]
Indicates condition of reverse switch status.
Monitor Item [Unit]
Main
Description
Test Item
Description
BATTERY SAVER
This test is able to check battery saver operation [On/Off].
PW REMOTO DOWN SET
This test is able to check power window down operation [On/Off].
OUTSIDE BUZZER
This test is able to check Intelligent Key warning buzzer operation [Off/On].
INSIDE BUZZER
This test is able to check combination meter warning chime operation [Key/Knob/Take Out/
Off].
INDICATOR
This test is able to check combination meter warning lamp operation [KEY IND/KEY ON/Off].
INT LAMP
This test is able to check interior room lamp operation [On/Off].
LCD
This test is able to check combination meter display information [Off/LK WN/OUTKEY/NO
KY/BATT/INSRT/SFT P/ROTAT/ID NG/BP I/BP N].
TRUNK/GLASS HATCH
This test is able to check trunk lid opener actuator open operation [Open].
FLASHER
This test is able to check hazard lamp operation [Off/LH/RH].
HORN
This test is able to check horn operation [On].
P RANGE
This test is able to check CVT shift selector illumination operation [On/Off].
ENGINE SW ILLUMI
This test is able to check push button ignition switch illumination operation [On/Off].
LOCK INDICATOR
This test is able to check LOCK indicator in push button ignition switch operation [On/Off].
ACC INDICATOR
This test is able to check ACC indicator in push button ignition switch operation [On/Off].
IGNITION ON IND
This test is able to check ignition ON indicator in push button ignition switch operation [On/
Off].
KEY SLOT ILLUMI
This test is able to check key slot illumination operation [On/Off].
TRUNK/BACK DOOR
This test is able to check trunk lid opener actuator operation [Open].
Support Item
Setting
Description
CONFIRM KEY FOB ID
MEMORY 1
Intelligent Key ID code can be checked.
MEMORY 2
MEMORY 3
MEMORY 4
NON REGIST
AUTO LOCK SET
MODE 4
2 min
Auto door lock time can be set in this mode.
MODE 3
30 sec
MODE 2
5 min
MODE 1*
1 min
LOCK/UNLOCK BY I-KEY
On*
Door lock/unlock function from Intelligent Key ON.
Off
Door lock/unlock function from Intelligent Key OFF.
ENGINE START BY I-KEY
On*
Engine start function from Intelligent Key ON.
Off
Engine start function from Intelligent Key OFF.
INL-16
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
*: Initial Setting
TRUNK/GLASS HATCH OPEN
On*
Buzzer reminder function by trunk opener request switch ON.
Off
Buzzer reminder function by trunk opener request switch OFF.
PANIC ALARM SET
MODE 3
1.5 sec
Panic alarm button set time on Intelligent Key can be set in this
mode.
MODE 2
OFF
MODE 1*
0.5 sec
PW DOWN SET
MODE 3
5 sec
Unlock button press time on Intelligent Key to lower front window can
be set in this mode.
MODE 2
OFF
MODE 1*
3 sec
TRUNK OPEN DELAY
MODE 3
1.5 sec
Trunk button pressing time on Intelligent Key button can be selected
from the following with this mode.
MODE 2
OFF
MODE 1*
0.5 sec
LO- BATT OF KEY FOB WARN
On*
Intelligent Key low battery warning mode ON.
Off
Intelligent Key low battery warning mode OFF.
ANTI KEY LOCK IN FUNCTI
On*
Key reminder function mode ON.
Off
Key reminder function mode OFF.
HAZARD ANSWER BACK
Lock/Unlock*
Hazard warning lamp activation when doors are locked or unlocked
with Intelligent Key.
Unlock Only
Hazard warning lamp activation when doors are unlocked with Intel-
ligent Key.
Lock Only
Hazard warning lamp activation when doors are locked with Intelli-
gent Key.
Off
No hazard warning lamp activation when doors are locked or un-
locked with Intelligent Key.
ANS BACK I-KEY LOCK
Horn Chirp
Horn chirp reminder when doors are unlocked with Intelligent Key
Buzzer*
Buzzer or horn chirp reminder when doors are unlocked with Intelli-
gent Key
Off
No buzzer or horn chirp reminder when doors are unlocked with In-
telligent Key
ANS BACK I-KEY UNLOCK
Off
No buzzer or horn chirp reminder when doors are unlocked with In-
telligent Key
On*
Buzzer or horn chirp reminder when doors are unlocked with Intelli-
gent Key
SHORT CRANKING OUTPUT
Start
70 msec
Starter motor operation duration times.
100 msec
200 msec
End
INSIDE ANT DIAGNOSIS
Start
This function allows inside key antenna self-diagnosis.
HORN WITH KEYLESS LOCK
Off
No horn reminder activation when doors are locked with Intelligent
Key.
On*
Horn reminder activation when doors are locked with Intelligent Key.
Support Item
Setting
Description
POWER SUPPLY AND GROUND CIRCUIT
INL-17
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
DTC/CIRCUIT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
BCM
BCM : Diagnosis Procedure
INFOID:0000000010051384
Regarding Wiring Diagram information, refer to
.
1.
CHECK FUSE AND FUSIBLE LINK
Check if the following BCM fuses or fusible link are blown.
Is the fuse or fusible link blown?
YES
>> Replace the blown fuse or fusible link after repairing the affected circuit.
NO
>> GO TO 2
2.
CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM.
3. Check voltage between BCM harness connector and ground.
Is the measurement normal?
YES
>> GO TO 3
NO
>> Repair or replace harness.
3.
CHECK GROUND CIRCUIT
Check continuity between BCM harness connector and ground.
Does continuity exist?
YES
>> Inspection End.
NO
>> Repair or replace harness.
BCM : Special Repair Requirement
INFOID:0000000010051385
1.
REQUIRED WORK WHEN REPLACING BCM
Terminal No.
Signal name
Fuse and fusible link No.
1
Battery power supply
H
11
10
24
7
Terminals
Voltage
(Approx.)
(+)
(
−)
BCM
Ground
Connector
Terminal
M16
1
Battery voltage
M17
11
M18
24
BCM
Ground
Continuity
Connector
Terminal
M17
13
Yes
INL-18
< DTC/CIRCUIT DIAGNOSIS >
POWER SUPPLY AND GROUND CIRCUIT
Initialize control unit. Refer to
BCS-5, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) :
>> Work End.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст