Nissan Maxima. Manual — part 653
COWL TOP
EXT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Removal and Installation
INFOID:0000000009465813
REMOVAL
1. Remove both wiper arms (RH/LH). Refer to
WW-78, "FRONT WIPER ARMS : Removal and Installation"
2. Remove the cowl top weatherstrip clips, then remove cowl top weatherstrip.
3. Release the pawls, then remove the cowl top side trim covers (RH/LH).
: Pawl
4. Pinch the cowl top extension clips (A) to release, then remove.
: Front
5. Disconnect the washer nozzle supply hose.
6. Release the cowl top grille clips, then remove cowl top.
7. Disconnect the harness connector from the wiper motor. Refer
to
WW-78, "FRONT WIPER DRIVE ASSEMBLY : Removal and
.
8. Remove the lower cowl top extension brace bolts, then remove
the lower cowl extension brace.
9. Remove the front wiper drive assembly. Refer to
"FRONT WIPER DRIVE ASSEMBLY : Removal and Installa-
10. Remove the lower cowl top extension RH/LH bolts, then remove lower cowl top extensions (RH/LH).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing, perform adjustment of wiper arm. Refer to
WW-78, "FRONT WIPER ARMS : Removal
.
• When installing the lower cowl top extension RH, tighten the bolts
in the order shown.
ALKIA1585ZZ
ALKIA1584ZZ
ALKIA2820ZZ
EXT-22
< REMOVAL AND INSTALLATION >
COWL TOP
• When installing the lower cowl top extension LH, tighten the bolts
in the order shown.
• When installing the lower cowl top extension brace, tighten the
bolts in the order shown.
ALKIA2821ZZ
ALKIA2822ZZ
FENDER PROTECTOR
EXT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FENDER PROTECTOR
Exploded View
INFOID:0000000009465814
Front
Rear
ALKIA1586ZZ
1.
Front fender protector
2.
Front fender protector side cover
A.
J-clip
ALKIA1587ZZ
EXT-24
< REMOVAL AND INSTALLATION >
FENDER PROTECTOR
Removal and Installation
INFOID:0000000009465815
FRONT FENDER PROTECTOR
Removal
NOTE:
Position front tires as necessary to remove the front fender protectors.
1. Remove the front screw from center mudguard.
2. Remove the front fender protector side cover clips, then remove front fender protector side cover.
3. Remove the front fender protector screws and clips, then remove front fender protector.
Installation
Installation is in the reverse order of removal.
NOTE:
Position front tires as necessary to install the front fender protectors.
REAR FENDER PROTECTOR
Removal
1. Remove the rear tire/wheel assembly. Refer to
2. Remove the rear fender protector screws and clips.
3. Remove the fender protector.
4. Remove the wind deflector screws, then remove the wind deflector.
Installation
Installation is in the reverse order of removal.
1.
Rear wind deflector
2.
Rear fender protector
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст