Nissan Maxima. Manual — part 654
MUDGUARD
EXT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
MUDGUARD
Exploded View
INFOID:0000000009465816
Removal and Installation
INFOID:0000000009465817
REMOVAL
1. Remove the clips located on the underbody.
2. Remove the center mudguard front and rear screws.
3. Remove the rear wind deflector bolt. Refer to
EXT-24, "Removal and Installation"
4. Release the clips located behind the center mudguard using a suitable tool, beginning with the front work-
ing rearward.
5. Remove the center mudguard from body side.
INSTALLATION
Installation is in the reverse order of removal.
1.
Mudguard
A.
Clip C205
B.
Clip CF118
Front
ALKIA2269ZZ
EXT-26
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE MOLDING
DOOR OUTSIDE MOLDING
Exploded View
INFOID:0000000009465818
Removal and Installation
INFOID:0000000009465819
FRONT DOOR OUTSIDE MOLDING
1.
Front door sash molding
2.
Front door outside molding
3.
Rear door outside molding
4.
Rear door sash molding (lower)
5.
Rear door sash molding (upper)
Pawl
ALKIA1589ZZ
DOOR OUTSIDE MOLDING
EXT-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Removal
1. Open the front door window fully.
2. Remove the side view mirror. Refer to
MIR-19, "Removal and Installation"
.
3. Using a suitable trim tool (A), lift front door outside molding (1)
enough to carefully insert a suitable release tool (B) beneath.
: Clip
CAUTION:
Apply protection tape (C) around entire work area.
4. Release the clip from rear of front door panel flange.
5. Lift and twist front door outside molding (1) upward, then out
from door panel flange.
6. Release the clip from the front of door panel flange.
CAUTION:
Use care not to damage body surfaces.
7. Remove front door outside molding.
Installation
Installation is in the reverse order of removal.
REAR DOOR OUTSIDE MOLDING
Removal
1. Open the rear door window fully.
2. Using a suitable trim tool (A), lift rear door outside molding (1)
enough to carefully insert a suitable release tool (B) beneath.
: Clip
CAUTION:
Apply protection tape (C) around entire work area.
3. Release the clip from the rear of door panel flange.
4. Lift and twist rear door outside molding (1) up, then outward
from door panel flange
5. Release the clip from the front of door panel flange.
CAUTION:
Use care not to damage body surfaces.
6. Remove rear door outside molding.
Installation
Installation is in the reverse order of removal.
FRONT DOOR SASH MOLDING
Removal
1. Open the front door window fully.
2. Remove front edge of front door weatherstrip, then remove front door sash molding screw.
3. Using a suitable tool, beginning at the front edge, release the front door sash molding working rearward.
4. Release the front door sash molding rear clip, then remove molding.
Installation
JMKIA2023ZZ
JMKIA2024ZZ
JMKIA2025ZZ
EXT-28
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE MOLDING
Installation is in the reverse order of removal.
REAR DOOR SASH MOLDING
Removal
1. Open the rear door window fully.
2. Release the upper half of rear door weatherstrip.
3. Release the rear door sash molding (upper) front clip, then pull molding forward in vehicle to disengage
from rear door sash molding (lower).
4. Remove the rear door sash molding (lower) screws, then with a suitable tool release the adhesive tape.
5. Remove rear door sash molding (lower) from rear door.
Installation
Installation is in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст