Nissan Maxima. Manual — part 645
EXL-322
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
OPTICAL SENSOR
OPTICAL SENSOR
Exploded View
INFOID:0000000009465391
Removal and Installation
INFOID:0000000009465392
CAUTION:
Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect compo-
nents from damage.
REMOVAL
1. Carefully remove the LH front tweeter speaker grille using a suitable tool.
2. Insert a suitable tool between the optical sensor and the LH front tweeter speaker grille. Lift the optical
sensor upward.
3. Disconnect the harness connector from the optical sensor and remove.
INSTALLATION
Installation is in the reverse order of removal.
1.
Optical sensor
2.
LH front tweeter speaker grille
3.
Optical sensor harness connector
4.
LH front tweeter speaker
5.
Instrument panel
ALLIA0900ZZ
DOOR MIRROR TURN SIGNAL LAMP
EXL-323
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
DOOR MIRROR TURN SIGNAL LAMP
Removal and Installation
INFOID:0000000009465393
The door mirror turn signal lamp is an integral part of the door mirror and must be replaced as an assembly.
MIR-19, "Removal and Installation"
.
EXL-324
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
LIGHTING & TURN SIGNAL SWITCH
LIGHTING & TURN SIGNAL SWITCH
Removal and Installation
INFOID:0000000009465394
NOTE:
The lighting and turn signal switch is integral with the combination switch assembly.
REMOVAL
1. Unlock steering wheel.
CAUTION:
• Before servicing, disconnect both battery terminals and wait at least three minutes
• Do not use air tools or electric tools for servicing.
• After the work is completed, make sure no system malfunction is detected by air bag warning
lamp.
• In case a malfunction is detected by the air bag warning lamp, reset with the self-diagnosis func-
tion and delete the memory with CONSULT.
• If a malfunction is still detected after the above operation, perform self-diagnosis to repair mal-
functions. Refer to
2. Remove steering column covers. Refer to
IP-13, "Removal and Installation"
.
3. Rotate steering wheel clockwise to access first combination switch bolt, then remove bolt.
4. Rotate steering wheel counter-clockwise to access second combination switch bolt, then remove bolt.
5. Disconnect the harness connectors from the lighting and turn signal switch and remove.
INSTALLATION
Installation is in the reverse order of removal.
HAZARD SWITCH
EXL-325
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HAZARD SWITCH
Exploded View
INFOID:0000000009465395
Removal and Installation
INFOID:0000000009465396
REMOVAL
1. Remove cluster lid D. Refer to
IP-18, "Removal and Installation"
2. Disconnect the harness connector from the hazard switch.
3. Remove the hazard switch.
INSTALLATION
Installation is in the reverse order of removal.
1.
Hazard switch
2.
Cluster lid D
ALLIA0901ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст